AIM-cue shutdown

From: Radioactive Frog (pbhatkoti@gmail.com)
Date: Sat Dec 08 2007 - 21:35:13 ART

• Next message: Muhammad Nasim: "Refurbished Cisco Equiment"
• Previous message: Radioactive Frog: "Re: qs - 6500 VS"
• Next in thread: Moe: "RE: AIM-cue shutdown"
• Maybe reply: Moe: "RE: AIM-cue shutdown"
• Maybe reply: Radioactive Frog: "Re: AIM-cue shutdown"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I am trying to shutdown the AIM-cue module. It shuts down but I can still
ping the AIM modules IP (14.10.6.25) address.

interface Service-Engine0/0
 ip unnumbered FastEthernet0/0.10
 service-module ip address 14.10.6.25 255.255.255.0
 service-module ip default-gateway 14.10.6.54
!

Any thought why i am still able to ping it? I was thinking that
service-module ip is related to the whole AIM-module, which I already
shutdown whole unit itself using the command srevice-blah...ha.h.....

But If i shutdown the service-module using blelow command, it stop pinging.

itec#
sitec#
sitec#config t
Enter configuration commands, one per line. End with CNTL/Z.
sitec(config)#int ser
sitec(config)#int servi
sitec(config)#int service-Engine 0/0
sitec(config-if)#shut
sitec(config-if)#
*Dec 9 00:38:52.307: %LINK-5-CHANGED: Interface Service-Engine0/0, changed
state to administratively down
*Dec 9 00:38:53.307: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Service-Engine0/0, changed state to down
sitec(co

sitec#
sitec#
sitec#
sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is being Shutdown
Service Module status is not available

sitec#
*Dec 9 00:34:27.998: %SERVICEMODULE-5-SHUTDOWN2: Service module
Service-Engine0/0 shutdown complete
sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is Shutdown
Service Module status is not available

sitec#
sitec#
sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is Shutdown
Service Module status is not available

sitec#
sitec#
sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is Shutdown
Service Module status is not available

sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is Shutdown
Service Module status is not available

sitec#
sitec#

Frog

• Next message: Muhammad Nasim: "Refurbished Cisco Equiment"
• Previous message: Radioactive Frog: "Re: qs - 6500 VS"
• Next in thread: Moe: "RE: AIM-cue shutdown"
• Maybe reply: Moe: "RE: AIM-cue shutdown"
• Maybe reply: Radioactive Frog: "Re: AIM-cue shutdown"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST