From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Dec 07 2007 - 19:35:38 ART
Before doing this you may consider taking a snapshot of the initial
configs. In the lab you'll have access to windows notepad, and (IIRC)
can use the log to file function of securecrt. This way if you need to
reference the original state of anything, IP address, interface states,
etc. you can just refer to your log file.
HTH!!!!
;)
-- Brian McGahan, CCIE #8593 (R&S/SP/Security) bmcgahan@internetworkexpert.com <mailto:bmcgahan@internetworkexpert.com> Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 x 705 Outside US: 775-826-4344 x 705 24/7 Support: http://forum.internetworkexpert.com Live Chat: http://www.internetworkexpert.com/chat/Scott Vermillion wrote: > Darby, > > I personally think you're being a bit overly dramatic here (shocking, I > know). If you can't handle something as simple as having the correct ports > in the correct state when you walk out the door, you didn't belong in the > lab to begin with. > > This is a simple matter. It's personal preference. I plan to shut all the > ports on all the switches when I start the lab. Just like I do in practice. > If I fail, it surely won't be because of anything related to this. > > Scott > > > -----Original Message----- > From: Darby Weaver [mailto:darbyweaver@yahoo.com] > Sent: Friday, December 07, 2007 4:36 AM > To: Anthony Sequeira; Scott Vermillion; Gary Duncanson; Ranjith Samuel > Cc: ccielab@groupstudy.com > Subject: RE: Shutting unused interface CCIE lab > > > Let me see what is one of the single biggest problems > for lab candidates... > > Bringing assumptions to the lab. > > If it ain't explicitly asked for, then it might cause > you more harm than good. > > But hey, it's your $1400.00 if you want to throw it > away and use it for a practice lab you can do that to. > > > > > > --- Anthony Sequeira <Anthony_Sequeira@skillsoft.com> > wrote: > > >> I am not shutting down a darn thing unless a task >> explicitly or >> implicitly requires it!!!!!!!!!!!! >> >> In fact this is my rule for anything I go to do at >> that keyboard in the >> lab! >> >> The only thing I can recall doing that they did not >> ask me to was a full >> connectivity test (TCL Script) and other necessary >> verifications. Notice >> that these verifications do not actually change >> anything! >> >> Anthony J. Sequeira >> #15626 >> Recert? No Problem! >> >> >> >> -----Original Message----- >> From: nobody@groupstudy.com >> [mailto:nobody@groupstudy.com] On Behalf Of >> Scott Vermillion >> Sent: Thursday, December 06, 2007 7:44 PM >> To: 'Gary Duncanson'; 'Ranjith Samuel' >> Cc: ccielab@groupstudy.com >> Subject: RE: Shutting unused interface CCIE lab >> >> We had this discussion just this week. I offered >> that I like to shut >> everything down using the interface range command >> and then enable things >> individually as I configure/verify. It occurred to >> me yesterday as I >> was >> starting a new lab that the other advantage this has >> is ensuring that >> you >> don't forget to shut your physical ports when doing >> PortChannels. >> >> At the end of the day, it's not a big overall impact >> one way or the >> other. >> Just pick an approach you're comfortable with and >> stick with it >> always... >> >> -----Original Message----- >> From: nobody@groupstudy.com >> [mailto:nobody@groupstudy.com] On Behalf Of >> Gary >> Duncanson >> Sent: Thursday, December 06, 2007 5:33 PM >> To: Ranjith Samuel >> Cc: ccielab@groupstudy.com >> Subject: Re: Shutting unused interface CCIE lab >> >> Well I think if the port is 'unused' in it's purest >> sense then it's >> probably >> shutdown anyway to be fair. >> >> Main thing is of course to follow requirements but >> also to apply common >> sense >> as well as best practice. If making sure an >> interface is shut down helps >> you >> out then I would say do it. Just makes sure you >> don't break something >> you >> need! >> >> Gary >> ----- Original Message ----- >> From: Ranjith Samuel >> To: Gary Duncanson ; uyota oyearone >> Cc: ccielab@groupstudy.com >> Sent: Friday, December 07, 2007 12:10 AM >> Subject: RE: Shutting unused interface CCIE lab >> >> >> >> I think you will be wasting your time doing this. >> On the contrary , >> you >> might have to unshut some ports to get your topology >> working. My advice >> is >> not >> to spend time doing tasks that are not required in >> the exam because you >> will >> need every minute of it. No marks for perfection!!! >> >> >> >> >> > ------------------------------------------------------------------------ > >> ---- >> - >> - >> > To: spycharlies@hotmail.com >> > CC: ccielab@groupstudy.com >> > Subject: Re: Shutting unused interface CCIE lab >> > Date: Thu, 6 Dec 2007 22:40:59 +0000 >> > From: gary.duncanson@googlemail.com >> > >> > I suppose so. >> > ----- Original Message ----- >> > From: "uyota oyearone" <spycharlies@hotmail.com> >> > To: "CCIE" <ccielab@groupstudy.com> >> > Sent: Thursday, December 06, 2007 10:04 PM >> > Subject: Shutting unused interface CCIE lab >> > >> > >> > > Hi Group, >> > > >> > > While studying for my lab, i always have an >> habit of shutting down >> unused >> > > interface so they do not trunk dynamically. >> > > >> > > Is this advisable in the actual CCIE lab ? >> > > >> > > cheers :- >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> >> > _________________________________________________________________ > >> > > Read what Santa`s been up to! For all the >> latest, visit >> > > asksantaclaus.spaces.live.com! >> > > http://asksantaclaus.spaces.live.com/ >> > > >> > > >> >> > _______________________________________________________________________ > >> > > Subscription information may be found at: >> > > http://www.groupstudy.com/list/CCIELab.html >> > >> > >> >> > _______________________________________________________________________ > >> > Subscription information may be found at: >> > http://www.groupstudy.com/list/CCIELab.html >> >> >> >> > ------------------------------------------------------------------------ > >> ---- >> - >> - >> It's about getting married. Click here! Try it! >> >> >> > _______________________________________________________________________ > >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html >> >> >> > _______________________________________________________________________ > >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html >> >> >> > _______________________________________________________________________ > >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html >> > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST