From: Phillip.McCollum@ins.com
Date: Fri Dec 07 2007 - 17:22:31 ART
That 'distance' command could be useful here:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hi
rp_r/rte_pih.htm#wp1134155
Phillip
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
itsfortarget iwillgetit
Sent: Friday, December 07, 2007 10:33 AM
To: ccielab@groupstudy.com
Subject: ospf intra are route filtering
Dear Group,
Pls listen this.....
I have Three Routers say R1, R2 , and R3 are connected in a
triangle topology and all are in OSPF area 0. now R3 is connoted with R4
with a serial link which is also part of area 0.In R1 have some net
works
say, 192.168.1.0, 2.0 and 3.0 which is published in OSPF domain.My
policy
strict that the 192.168.3.0 network should not appear in R4's routing
table,
but I have only access to R1 and R2 to achieve this task.
could you please throw some inputs to filter this OSPF route in this
single
area?.
Regards.
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST