From: omair naim (omairnaim1@hotmail.com)
Date: Thu Dec 06 2007 - 06:40:40 ART
To enable routing on these two bridged interfaces, as you are using Integrated
routing and bridging. Refer to link below:
http://www.cisco.com/en/US/tech/tk389/tk815/technologies_tech_note09186a00800
94663.shtml> Date: Thu, 6 Dec 2007 12:43:44 +0400> From: taj.mateen@gmail.com>
To: ccielab@groupstudy.com> Subject: Bridge-group> > Dear Experts,> > Please
help me out about below mentioned configuration,Why we are using>
Bridge-Group,what is use of it.> > Thanks in advance> > bridge irb> !> !>
interface FastEthernet0/0> description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE
0/0$> no ip address> no ip proxy-arp> duplex auto> speed auto> bridge-group
32> !> interface FastEthernet0/1> no ip address> no ip proxy-arp> duplex auto>
speed auto> bridge-group 32> !> interface Serial0/0/0> description "Lease Line
31231786"> ip address xxxxxx> ip access-group 103 in> no ip proxy-arp> !>
interface BVI32> ip address 83.111.x.x 255.255.255.248> !> >
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST