From: Tandou Mohamed (dtandou@yahoo.com)
Date: Tue Dec 04 2007 - 15:21:22 ART
Tandou Mohamed <dtandou@yahoo.com> wrote: Hello GS,
i am trying to configure Default MSDP Peer . i am following the example in the DoC cd. my question is: for MSDP peer to work BGP should run between the peer ? in my case MSDP peer does not come up til i enable BGP. In the DoC cd they said BGP does not have to be enabled may be i am reading wrong. Please advise
Thanks,
Mohamed
Default MSDP Peer The following example is a partial configuration of Router A and Router C in Figure 79. Each of these ISPs may have more than one customer like the customer in Figure 79 that use default peering (no BGP or MBGP). In that case, they may have similar configurations. That is, they will only accept SAs from a default peer if the SA is permitted by the corresponding prefix list.
Router A Configuration
ip msdp default-peer 10.1.1.1
ip msdp default-peer 10.1.1.1 prefix-list site-a ge 32
ip prefix-list site-b permit 10.0.0.0/8
Router C Configuration
ip msdp default-peer 10.1.1.1 prefix-list site-a ge 32
ip prefix-list site-b permit 10.0.0.0/8
Figure 79 Default MSDP Peer Scenario
---------------------------------
Be a better sports nut! Let your teams follow you with Yahoo Mobile. Try it now.
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
---------------------------------
Never miss a thing. Make Yahoo your homepage.
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST