From: Gupta, Gopal (NWCC) (gopal.gupta@hp.com)
Date: Tue Dec 04 2007 - 06:24:35 ART
In my opinion you don't need coz, R1 will flood through dense mode abt
RP and further R4 will do the same; provided that IP pim auto RP is
configured on R1,R4 and R2 so, There should be no problem for R5 to
accept that info about the RP.
HTH
Gops
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
nhatphuc
Sent: Tuesday, December 04, 2007 14:44
To: Cisco certification
Subject: IP PIM AutoRP Listener placement?
Importance: Low
Hi Group,
My topology is like this:
R1------R2-----R3
|
|
R4
|
|
R5
PIM Sparse Mode is configured. R1 is Mapping Agent, R2 and R4 are cRP. I
choose to use ip pim autorp listener.
My opinion is: No need to configure ip pim autorp listener on R3 and R5.
My question: Do you have the same idea as me? Why/Why not?
Thank you
Phuc
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST