From: shiran guez (shiranp3@gmail.com)
Date: Tue Dec 04 2007 - 06:35:34 ART
you do not need to configure ip pim autorp listener on the edge routers in
your network as they will get the RP Mapping from there PIM Neighbor, it is
needed in transit routers although it is recommended to put on all pim
neighbors in your network.
On Dec 4, 2007 11:24 AM, Gupta, Gopal (NWCC) <gopal.gupta@hp.com> wrote:
> In my opinion you don't need coz, R1 will flood through dense mode abt
> RP and further R4 will do the same; provided that IP pim auto RP is
> configured on R1,R4 and R2 so, There should be no problem for R5 to
> accept that info about the RP.
>
> HTH
> Gops
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> nhatphuc
> Sent: Tuesday, December 04, 2007 14:44
> To: Cisco certification
> Subject: IP PIM AutoRP Listener placement?
> Importance: Low
>
> Hi Group,
>
> My topology is like this:
>
> R1------R2-----R3
> |
> |
> R4
> |
> |
> R5
>
> PIM Sparse Mode is configured. R1 is Mapping Agent, R2 and R4 are cRP. I
> choose to use ip pim autorp listener.
>
> My opinion is: No need to configure ip pim autorp listener on R3 and R5.
>
> My question: Do you have the same idea as me? Why/Why not?
>
> Thank you
>
> Phuc
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST