From: Carlos Trujillo Jimenez (nergal888@hotmail.com)
Date: Fri Nov 30 2007 - 09:30:27 ART
HI Saul, at the vtp transparent switch I cant turn On vtp pruning
sw3#show vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 7
VTP Operating Mode : Transparent
VTP Domain Name : CISCO
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x30 0x64 0x2B 0xC1 0x4C 0x80 0x44 0xEC
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
sw3#
sw3#config t
Enter configuration commands, one per line. End with CNTL/Z.
sw3(config)#vtp prun
sw3(config)#vtp pruning
Cannot modify pruning unless in VTP server mode
sw3(config)#
>From: "Saul Arjona" <saul.arjona.bueno@gmail.com>
>>X-OriginalArrivalTime: 30 Nov 2007 06:34:55.0171 (UTC)
>>FILETIME=[1EAAE930:01C8331B]
>
>Not completelly sure why it is not working for you, it worked for me. I do
>not have right now the topology with me but try enabling vtp pruning on SW3
>as well .
>
>Regards,
>-Saul
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:32 ART