From: shiran guez (shiranp3@gmail.com)
Date: Fri Nov 30 2007 - 10:36:21 ART
VTP Pruning is only eligible to be activated on the VTP Server.
VTP Transparent is a stand alone switch.
On Nov 30, 2007 2:30 PM, Carlos Trujillo Jimenez <nergal888@hotmail.com>
wrote:
> HI Saul, at the vtp transparent switch I cant turn On vtp pruning
>
>
> sw3#show vtp status
> VTP Version : 2
> Configuration Revision : 0
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 7
> VTP Operating Mode : Transparent
> VTP Domain Name : CISCO
> VTP Pruning Mode : Disabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Disabled
> MD5 digest : 0x30 0x64 0x2B 0xC1 0x4C 0x80 0x44 0xEC
> Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
> sw3#
> sw3#config t
> Enter configuration commands, one per line. End with CNTL/Z.
> sw3(config)#vtp prun
> sw3(config)#vtp pruning
> Cannot modify pruning unless in VTP server mode
> sw3(config)#
>
>
>
> >From: "Saul Arjona" <saul.arjona.bueno@gmail.com>
> >>X-OriginalArrivalTime: 30 Nov 2007 06:34:55.0171 (UTC)
> >>FILETIME=[1EAAE930:01C8331B]
> >
> >Not completelly sure why it is not working for you, it worked for me. I
> do
> >not have right now the topology with me but try enabling vtp pruning on
> SW3
> >as well .
> >
> >Regards,
> >-Saul
>
> _________________________________________________________________
> MSN Amor: busca tu = naranja http://latam.msn.com/amor/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:32 ART