From: advitar84@yahoo.com
Date: Mon Nov 26 2007 - 20:51:41 ART
Took the statement ppp authen chap out of R5 config so it now reads
interface Serial0/1
ip address 132.1.45.5 255.255.255.0
encapsulation ppp
ppp chap hostname R5
end
Same issue remains though
Im using a DCE/DTE cable to connect both there serial interfaces Its not like HDLC I don't need a clock rate right?
Rack1R5(config-if)#do show controller s0/1
Interface Serial0/1
Hardware is Quicc 68360
DTE V.35 clocks stopped.
idb at 0x64200B30, driver data structure at 0x6420824C
WIC interrupt reg = F
SCC Registers:
Interface Serial0/1
Hardware is Quicc 68360
DCE V.35, no clock
idb at 0x6430E670, driver data structure at 0x64315D8C
WIC interrupt reg = F
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART