From: thomas.rader@freesurf.ch
Date: Sat Nov 24 2007 - 06:23:04 ART
oops.. I ment that you can do this on 3560's
>On Nov 24, 2007 10:25 AM, shiran guez wrote:
>
>you cant mark on input!
>
>I think only 65xx series support input marking of packets.
>
>
>
>
>On Nov 24, 2007 10:14 AM, <thomas.rader@freesurf.ch> wrote:
--> Hi, > > When you use AutoQos on the 4500 it configures DBL with an "service-policy > output" command on the interface level. > > policy-map autoqos-voip-policy > class class-default > dbl > > interface GigabitEthernet3/1 > service-policy output autoqos-voip-policy > qos trust cos > auto qos voip trust > tx-queue 3 > bandwidth percent 33 > priority high > shape percent 33 > > The issue I have is that I want to use an ACL to Mark voice traffic with > EF which uses a "service-policy input". > > As far as I am aware, you can't have an output and an input service-policy > on the same interface. > > policy-map QoS > class class-voice > set dscp ef > class class-default > set dscp default > > class-map match-any class-voice > match access-group 100 > > access-list 100 permit ip 10.10.10.0 0.0.0.255 any > > interface FastEthernet0/1 > service-policy input QoS > > > Can anyone offer any help ? > > Thanks, Thomas > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART