From: Henrique Reis (reis.henrique@gmail.com)
Date: Thu Nov 22 2007 - 10:14:48 ART
Could you change the IOS? As you can see I didn't have problem to create
this ACL.
On 11/21/07, George De Pacina <George.DePacina@btalsaudia.com.sa> wrote:
>
> Hi Henrique,
>
>
>
> I'm using;
>
>
>
> Rack1R1#
>
> Rack1R1#config t
>
> Enter configuration commands, one per line. End with CNTL/Z.
>
> Rack1R1(config)#ip access-list extended DYNAMIC
>
> %
>
> % Invalid access list name.
>
> Rack1R1(config)#
>
> Rack1R1(config)#do show ver
>
> Cisco IOS Software, 3600 Software (C3640-JK9O3S-M), Version 12.3(14)T7,
> RELEASE SOFTWARE (fc2)
>
> Technical Support: http://www.cisco.com/techsupport
>
> Copyright (c) 1986-2006 by Cisco Systems, Inc.
>
> Compiled Wed 22-Mar-06 21:46 by pwade
>
>
>
> - george
>
>
> ------------------------------
>
> *From:* Henrique Reis [mailto:reis.henrique@gmail.com]
> *Sent:* 21 November 2007 15:55
> *To:* George De Pacina
> *Cc:* ccielab@groupstudy.com
> *Subject:* Re: % Invalid access list name.
>
>
>
> What version are you using?
>
>
>
> Rack1R1(config)#ip access-list extended DYNAMIC
> Rack1R1(config-ext-nacl)#do sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.3(22), RELEASE
> SOFTWARE (fc2
> )
>
>
>
> On 11/21/07, *George De Pacina* <George.DePacina@btalsaudia.com.sa> wrote:
>
> Hi,
>
>
>
> When I create an extended name ACL I get this error message, but if I add
> "_" the command is accepted. Has anyone experienced this?
>
>
>
> Rack1R2(config)#
>
> Rack1R2(config)#ip access-list extended DYNAMIC
>
> %
>
> % Invalid access list name.
>
> Rack1R2(config)#
>
> Rack1R2(config)#ip access-list extended DYNAMIC_
>
> Rack1R2(config-ext-nacl)#
>
>
>
> thanks,
>
> george
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART