From: Amr CCIE (amr.ccie@gmail.com)
Date: Thu Nov 22 2007 - 11:20:27 ART
Dear George,
I think that Cisco IOS block creating access-list
with the name "dynamic" , this is due to introducing new dynamic
access-list starting from the release 12.3(7)T
Also new show command was entered "Show ip
access-list dynamic" starting from the above release , so for not
making any confilicts the IOS blocks access lists with the name
"dynamic"
Dynamic access is used for more security purpose ,
if you are interested in it , you can go to the following link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_c/ftrafwl/scflock.htm
I hope this could be useful george
Regards
Amr
On Nov 22, 2007 3:14 PM, Henrique Reis <reis.henrique@gmail.com> wrote:
> Could you change the IOS? As you can see I didn't have problem to create
> this ACL.
>
>
>
>
> On 11/21/07, George De Pacina <George.DePacina@btalsaudia.com.sa> wrote:
> >
> > Hi Henrique,
> >
> >
> >
> > I'm using;
> >
> >
> >
> > Rack1R1#
> >
> > Rack1R1#config t
> >
> > Enter configuration commands, one per line. End with CNTL/Z.
> >
> > Rack1R1(config)#ip access-list extended DYNAMIC
> >
> > %
> >
> > % Invalid access list name.
> >
> > Rack1R1(config)#
> >
> > Rack1R1(config)#do show ver
> >
> > Cisco IOS Software, 3600 Software (C3640-JK9O3S-M), Version 12.3(14)T7,
> > RELEASE SOFTWARE (fc2)
> >
> > Technical Support: http://www.cisco.com/techsupport
> >
> > Copyright (c) 1986-2006 by Cisco Systems, Inc.
> >
> > Compiled Wed 22-Mar-06 21:46 by pwade
> >
> >
> >
> > - george
> >
> >
> > ------------------------------
> >
> > *From:* Henrique Reis [mailto:reis.henrique@gmail.com]
> > *Sent:* 21 November 2007 15:55
> > *To:* George De Pacina
> > *Cc:* ccielab@groupstudy.com
> > *Subject:* Re: % Invalid access list name.
> >
> >
> >
> > What version are you using?
> >
> >
> >
> > Rack1R1(config)#ip access-list extended DYNAMIC
> > Rack1R1(config-ext-nacl)#do sh ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.3(22), RELEASE
> > SOFTWARE (fc2
> > )
> >
> >
> >
> > On 11/21/07, *George De Pacina* <George.DePacina@btalsaudia.com.sa> wrote:
> >
> > Hi,
> >
> >
> >
> > When I create an extended name ACL I get this error message, but if I add
> > "_" the command is accepted. Has anyone experienced this?
> >
> >
> >
> > Rack1R2(config)#
> >
> > Rack1R2(config)#ip access-list extended DYNAMIC
> >
> > %
> >
> > % Invalid access list name.
> >
> > Rack1R2(config)#
> >
> > Rack1R2(config)#ip access-list extended DYNAMIC_
> >
> > Rack1R2(config-ext-nacl)#
> >
> >
> >
> > thanks,
> >
> > george
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART