From: Farrukh Haroon (farrukhharoon@gmail.com)
Date: Tue Nov 20 2007 - 14:07:34 ART
Dear Zoheb
You need at least IOS 12.2(33)SXH to support this feature on the Cat6k.
Have a look at this:
IPSec Dead Peer Detection (DPD) Periodic Message OptionSee this
publication:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t
/123t_7/gtdpmo.htm<http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/pro
ducts_feature_guide09186a00806c2875.html>
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide
09186a00806c2875.html
Regards
Farrukh
On Nov 20, 2007 10:13 AM, Zoheb Sarwar <sarwarzoheb@gmail.com> wrote:
> I am terminating my remote access VPNs on 6509-E switch running 12.2(18).
> I
> want to enable the DPD feature for the vpn users, where the network
> connection disconnects without proper termination of the tunnel ( the
> reverse route remains in the routing table).
>
> I can't find the keywork periodic under the crypto isakmp keepalive
> command,
> is there any other way to achieve the same task.
>
> *crypto isakmp keep alives* *seconds retries* <cr>
>
> Thanks
> Zoheb
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART