From: Radioactive Frog (pbhatkoti@gmail.com)
Date: Mon Nov 19 2007 - 19:05:01 ART
Toonsh,
Please check the codec as well.
On Nov 20, 2007 7:02 AM, toonsh dosh <toonsh@hotmail.com> wrote:
> Hi ,
>
> Sorry for the OT. Was wondering if anyone has had much experience with
> Polycom
> V500 conference units registering as H323 devices on Gatekeeper. I have
> been
> able to get the devices to register fine on GK, I would like these clients
> to
> be able to dial one another directly via the GK. They are currently able
> to
> dial into the MCU no prblem. Should there been anything specific that
> should
> be allowed on the GK to allow the terminals to call one another ? Below
> find
> an excerpt of the config:
>
> gatekeeper zone local zone1d test.com 172.18.2.9 zone local zone1a
> test.com
> zone local zone1b test.com
> zone subnet zone1a 172.18.184.130/32 enable zone subnet zone1a
> 172.18.182.37/32 enable zone subnet zone1a 172.18.181.112/32 enable zone
> subnet zone1a 172.18.180.101/32 enable zone subnet zone1a
> 172.18.184.209/32
> enable zone subnet zone1a 172.18.182.157/32 enable
> zone prefix zone1a 6712*
> zone prefix zone1a 6037*
> zone prefix zone1a 6730* zone prefix zone1a 6731*
> zone prefix zone1a 6... gw-priority 10 CM_PUB_1 zone prefix zone1a 6...
> gw-priority 9 CM_PUB_2
> gw-type-prefix 1#* default-technology gw-type-prefix 81* hopoff zone1a gw
> ipaddr 172.18.2.10 1720 no use-proxy zone1a default inbound-to terminal no
> use-proxy zone1a default outbound-from terminal no use-proxy zone1b
> default
> inbound-to terminal no use-proxy zone1b default outbound-from terminal no
> use-proxy zone1c.ibm.com default inbound-to terminal no use-proxy
> zone1c.ibm.com default outbound-from terminal no use-proxy zone1d default
> inbound-to terminal no use-proxy zone1d default outbound-from terminal no
> use-proxy zone1e default inbound-to terminal no use-proxy zone1e default
> outbound-from terminal no use-proxy zone1f default inbound-to terminal no
> use-proxy zone1f default outbound-from terminal no use-proxy zone1g
> default
> inbound-to terminal no use-proxy zone1g default outbound-from terminal no
> use-proxy zone1h default inbound-to terminal no use-proxy zone1h default
> outbound-from terminal no shutdown
>
> So for now I would like a device in zone1a which is assigned DN 6712 to
> call
> 6037 via the gatekeeper.
>
> Thanks !
> _________________________________________________________________
> Get the next generation of Windows Live services now!
> http://get.live.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART