Re: "show ip pim rp mapping" takes too long to display

From: Anthony Bonilla (anthonybonilla.ccie@gmail.com)
Date: Thu Nov 15 2007 - 08:12:39 ART

• Next message: Anthony Bonilla: "Re: OT: EIGRP neighbor reset because of ACL or prefix list"
• Previous message: Sadiq Yakasai: "Re: What is the difference between police cir and police rate?"
• Maybe in reply to: dee tee: "Re: "show ip pim rp mapping" takes too long to display"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

All,

Thanks for suggestions - I am sorry for the late reply but adding "no ip
domain-lookup" did the trick. Thanks a lot dee tee.

Tony

On 11/14/07, Geert Nijs <Geert.Nijs@simac.be> wrote:
>
> All,
>
> Then make sure that the router can (reverse-DNS) resolve the RPs addresses
> quickly by adding them to the DNS servers for example.
>
> regards,
> Geert
> CCIE #13729
>
> ________________________________________
> From: nobody@groupstudy.com [nobody@groupstudy.com] On Behalf Of Anthony
> Bonilla [anthonybonilla.ccie@gmail.com]
> Sent: 13 November 2007 05:21
> To: dee tee
> Cc: ccielab@groupstudy.com
> Subject: Re: "show ip pim rp mapping" takes too long to display output...
>
> Thanks guys for your suggestions but I am wondering what if we need to use
> DNS, disabling domain-lookup can't be done - right?
>
> On 11/9/07, dee tee <dt30083@gmail.com> wrote:
> >
> > Configure no ip domain-lookup and ur problem will go away.
> >
> > On 11/8/07, Anthony Bonilla <anthonybonilla.ccie@gmail.com> wrote:
> >
> > > Hi Group,
> > >
> > > I have been facing an issue in displaying the output of "sh ip pim rp
> > > mapping" in our production envirionment. We are cuurently using
> static
> > > RP
> > > but allow an external RP for one of the partners that is learned via
> > > Auto
> > > RP. We have configured static RP with override keyword to ensure that
> > > auto
> > > RP is not preferred over static but when I issue that rp mapping
> > > command, I
> > > have noticed a delay of about 30-45 minute before router stopped
> > > displaying
> > > this information (I am talking about 65k with sup720s). Can someone
> pls
> > > let
> > > me know if you have come across this issue and/or know what the
> problem
> > > could be? TIA.
> > >
> > > Tony
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> disclaimer : http://webservices.simac.be/disclaimer.htm

• Next message: Anthony Bonilla: "Re: OT: EIGRP neighbor reset because of ACL or prefix list"
• Previous message: Sadiq Yakasai: "Re: What is the difference between police cir and police rate?"
• Maybe in reply to: dee tee: "Re: "show ip pim rp mapping" takes too long to display"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART