From: dee tee (dt30083@gmail.com)
Date: Fri Nov 09 2007 - 15:16:30 ART
Configure no ip domain-lookup and ur problem will go away.
On 11/8/07, Anthony Bonilla <anthonybonilla.ccie@gmail.com> wrote:
>
> Hi Group,
>
> I have been facing an issue in displaying the output of "sh ip pim rp
> mapping" in our production envirionment. We are cuurently using static RP
> but allow an external RP for one of the partners that is learned via Auto
> RP. We have configured static RP with override keyword to ensure that
> auto
> RP is not preferred over static but when I issue that rp mapping
> command, I
> have noticed a delay of about 30-45 minute before router stopped
> displaying
> this information (I am talking about 65k with sup720s). Can someone pls
> let
> me know if you have come across this issue and/or know what the problem
> could be? TIA.
>
> Tony
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART