From: Tarun Pahuja (pahujat@gmail.com)
Date: Wed Nov 14 2007 - 12:20:44 ART
Few things to consider when dealing with VTP pruning:
"Enabling VTP pruning on a VTP server enables pruning for the entire
management domain.
By default VLANs 2 through 1000 are pruning-eligible. VTP pruning does not
prune traffic from VLANs that are pruning-ineligible. VLAN 1 is always
pruning-ineligible; traffic from VLAN 1 cannot be pruned.
Enabling or disabling VTP pruning on a VTP server enables or disables VTP
pruning for the entire management domain.
Making VLANs pruning-eligible or pruning-ineligible on a switch affects
pruning-eligibility for those VLANs on that device only (not on all switches
in the VTP domain)"
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_4_2/config/vlans.htm#xtocid79807
HTH,
Tarun
On Nov 13, 2007 4:27 PM, CCIEin2006 <ciscocciein2006@gmail.com> wrote:
> Task states to filter traffic on the 802.1q trunks so that only necessary
> VLAN traffic is sent over them.
>
> Would enabling vtp pruning do the trick or should I manually edit the
> allowed vlan list?
>
> Please don't say ask the proctor - lets assume you already asked the
> proctor
> what he preferred and he told you to sit down and shut up.
>
> How would you configure it?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART