From: dara tomar (wish2ie@gmail.com)
Date: Mon Nov 12 2007 - 02:44:17 ART
*Hi Gopal,
Try using .....
** SW#erase flash
SW#squeeze flash
HTH,
Regards,
Dara*
On Nov 12, 2007 11:06 AM, Gupta, Gopal (NWCC) <gopal.gupta@hp.com> wrote:
> Hi Folks
> ,
> I am working on dynamips, i have issue creating VLANs on Cisco 3600 with
> 16 port module.
>
> i get an error while creating the Vlan, following is the Error message
>
> SW1#vlan data
> SW1(vlan)#vlan 2
> VLAN 2 added:
> Name: VLAN0002
> SW1(vlan)#exit
> not enough space on flash to store vlandatabase. trying squeeze...First
> create squeeze log by erasing the entire device
>
> Error squeezing flash(Missing or corrupted log)
> Error on database apply 40: NV storage failure
> Use 'abort' command to exit
> SW1(vlan)#exit
> not enough space on flash to store vlandatabase. trying squeeze...First
> create squeeze log by erasing the entire device
>
> Error squeezing flash(Missing or corrupted log)
> Error on database apply 40: NV storage failure
> Use 'abort' command to exit
>
> SW1#sh flash:
>
> System flash directory:
> File Length Name/status
> 1 600 vlan.dat [deleted]
> 2 660 vlan.dat [deleted]
> 3 600 vlan.dat [deleted]
> 4 660 vlan.dat [deleted]
> 5 720 vlan.dat [deleted]
> [8388604 bytes used, 0 available, 8388604 total]
> 8192K bytes of processor board System flash (Read/Write)
>
>
> SW1#squeeze flash:
> Squeeze operation may take a while. Continue? [confirm]
> First create squeeze log by erasing the entire device
>
> %Error squeezing flash (Missing or corrupted log)
> SW1#squeeze flash: /nmolog
>
> Any comments ...??
>
> Thanks
> Gops
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART