From: Gupta, Gopal (NWCC) (gopal.gupta@hp.com)
Date: Mon Nov 12 2007 - 02:36:24 ART
Hi Folks
,
I am working on dynamips, i have issue creating VLANs on Cisco 3600 with
16 port module.
i get an error while creating the Vlan, following is the Error message
SW1#vlan data
SW1(vlan)#vlan 2
VLAN 2 added:
Name: VLAN0002
SW1(vlan)#exit
not enough space on flash to store vlandatabase. trying squeeze...First
create squeeze log by erasing the entire device
Error squeezing flash(Missing or corrupted log)
Error on database apply 40: NV storage failure
Use 'abort' command to exit
SW1(vlan)#exit
not enough space on flash to store vlandatabase. trying squeeze...First
create squeeze log by erasing the entire device
Error squeezing flash(Missing or corrupted log)
Error on database apply 40: NV storage failure
Use 'abort' command to exit
SW1#sh flash:
System flash directory:
File Length Name/status
1 600 vlan.dat [deleted]
2 660 vlan.dat [deleted]
3 600 vlan.dat [deleted]
4 660 vlan.dat [deleted]
5 720 vlan.dat [deleted]
[8388604 bytes used, 0 available, 8388604 total]
8192K bytes of processor board System flash (Read/Write)
SW1#squeeze flash:
Squeeze operation may take a while. Continue? [confirm]
First create squeeze log by erasing the entire device
%Error squeezing flash (Missing or corrupted log)
SW1#squeeze flash: /nmolog
Any comments ...??
Thanks
Gops
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART