From: Thomas Perrier (thomas@perrier.name)
Date: Sat Nov 10 2007 - 16:32:56 ART
On 10/11/07 17:02, "kang lee" <kanghlee@gmail.com> wrote:
> I also have same problems and I looked up on cisco site they have 12.3
> version T train that support ospf v3. yes you need 32 mb flash memory
> for any train code.
>
> actually, one of my 2620 serious router has 32 mb flash, I upgrade to
> flash:c2600-is-mz.123-23.bin. it is workign great for ospf v3.
>
> 18Mb bin file .
Thanks for the correction. I verified that 12.3 IP PLUS indeed has OSPF v3
on the 2600. And on the plus side, it's still available on Cisco's
downloads, unlike 12.2T versions.
-- Thomas Perrier CCIE #18731 (R&S)> On Nov 10, 2007 2:14 AM, Thomas Perrier <thomas@perrier.name> wrote: >> On 10/11/07 5:40, "Tony Blanco" <blancoj17@yahoo.com> wrote: >> >>> IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(24), RELEASE SOFTWARE >> >> As "advitar84" mentioned, you also need a 12.2T release to get OSPFv3 on a >> 2600. Later trains didn't have it. And if your 2620 doesn't have a 32 MB >> flash, it'll have to TFTP boot.
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART