From: Tarun Pahuja (pahujat@gmail.com)
Date: Fri Nov 09 2007 - 16:10:50 ART
Scott,
Try reading the following two documents, If you still need
assistance I will surely jump in and explain. I am slightly hesitant in
giving a direct answer as the initial thread points to a specific workbook.
ftp://ftpeng.cisco.com/ipmulticast/autorp.html#Commonerrors
http://www.cisco.com/en/US/tech/tk828/technologies_configuration_example09186a00801cb923.shtml
HTH,
Tarun
On Nov 9, 2007 1:45 PM, Scott Vermillion <scott_ccie_list@it-ag.com> wrote:
> So Tarun,
>
> As I just mentioned in another thread, I've skipped ahead to the mcast
> section of a CoD I'm in the middle of. It was not explained why,
> precisely,
> but it was clearly stated that only permit statements are a valid
> configuration wrt group-list ACLs. So I still don't remember where I got
> this the first time around, but now here I have it again a second time.
> Also, it was specifically mentioned that the DocCD is less than stellar on
> this particular topic (agreed!).
>
> And it would seem that Chris's findings support this idea that deny
> statements are a problem (even though they can, of course, be entered into
> the configuration).
>
> Any thoughts to help clarify this? Seems to be a recurring topic (not
> quite
> up there with the 14 second STP thing, but recurring nevertheless)...
>
> Regards,
>
> Scott
>
>
> -----Original Message-----
> From: Scott Vermillion [mailto:scott_ccie_list@it-ag.com]
> Sent: Thursday, November 08, 2007 2:43 PM
> To: 'Tarun Pahuja'; 'Guyler, Rik'
> Cc: 'Rich Collins'; 'Chris Riling'; 'Joseph Brunner'; 'groupstudy'
> Subject: RE: Soup-to-Nuts: MCAST Lab 5 - Auto RP with Multiple RP's
>
> Tarun,
>
> Are you saying you've done and can personally confirm this approach?
> Because I've seen loads of stuff on CCO and in Cisco Press books that I
> wouldn't try to take to the bank. I can't recall where at this point or I
> would post a link or something, but I'm pretty sure we've had it proven
> definitively that deny statements are a problem for Auto RP group-list
> ACLs.
> At least in 12.4 code...
>
> Regards,
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Tarun Pahuja
> Sent: Thursday, November 08, 2007 1:48 PM
> To: Guyler, Rik
> Cc: Rich Collins; Chris Riling; Joseph Brunner; groupstudy
> Subject: Re: Soup-to-Nuts: MCAST Lab 5 - Auto RP with Multiple RP's
>
> Rik,
> A Deny statement is perfectly acceptable as per CCO.
>
>
> http://cisco.com/en/US/tech/tk828/technologies_tech_note09186a0080094821.sht
> ml#autowithmult
>
> Thanks,
> Tarun
>
> On Nov 8, 2007 2:00 PM, Guyler, Rik <rguyler@shp-dayton.org> wrote:
>
> > Well, I'll have to agree there that I've never seen deny statements in
> > the ACL. It's reasonable to think that you should be able to put them
> > in there, however as sometimes you may just need to but I've always seen
> > permits only.
> >
> > Rik
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Rich Collins
> > Sent: Wednesday, November 07, 2007 6:54 PM
> > To: Tarun Pahuja
> > Cc: Chris Riling; Joseph Brunner; groupstudy
> > Subject: Re: Soup-to-Nuts: MCAST Lab 5 - Auto RP with Multiple RP's
> >
> > Hello,
> >
> > We had a similar thread a couple of weeks ago and I made a comment
> > (observation from many lab book examples) that there never seemed to be
> > a deny statement in these access-lists describing the multicast groups.
> > The auto-rp seems to drop that group range (see the minus (-)
> > sign) in the rp mapping.
> >
> > I never spent the time to investigate further. I guess you create a
> > list of permit statements and conveniently skip over those groups you
> > don't want in....or maybe someone else in GS knows more about this?
> >
> > -Rich
> >
> >
> > ip pim send-rp-announce Loopback0 scope 5 group-list 1 interval 10 !
> > access-list 1 deny 224.8.8.8 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> > access-list 1 permit 224.0.0.0 15.255.255.255
> >
> >
> > R4#sh ip pim rp mapp
> > PIM Group-to-RP Mappings
> > This system is an RP (Auto-RP)
> > This system is an RP-mapping agent
> >
> > Group(s) 224.0.0.0/4
> > RP 4.4.4.4 (?), v2v1
> > Info source: 4.4.4.4 (?), elected via Auto-RP
> > Uptime: 02:05:34, expires: 00:00:27
> > Group(s) (-)224.8.8.8/32 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> >
> >
> > On Nov 7, 2007 1:52 PM, Tarun Pahuja <pahujat@gmail.com> wrote:
> > > Please use appropriate mask when defining the multicast group on
> > > router 1 and 4, seems like the mapping agent thinks that you are
> > > trying to advertise the same multicast(group,rp) mapping from two
> > > different sources and it is choosing the one with the highest ip
> > address.
> > >
> > > I see you have google account, we can take this offline if you want,
> > > just ping me in Google IM.
> > >
> > > HTH,
> > > Tarun
> > >
> > >
> > >
> > > On 11/7/07, Chris Riling <criling@gmail.com> wrote:
> > > >
> > > > It appears as though the mappings aren't working right:
> > > >
> > > > R1:
> > > >
> > > >
> > > > R1#sh ip pim rp mapp
> > > > PIM Group-to-RP Mappings
> > > > This system is an RP (Auto-RP)
> > > > This system is an RP-mapping agent
> > > >
> > > > Group(s) 224.0.0.0/4
> > > > RP 4.4.4.4 (?), v2v1
> > > > Info source: 4.4.4.4 (?), elected via Auto-RP
> > > > Uptime: 01:56:30, expires: 00:00:30
> > > > Group(s) (-)224.8.8.8/32
> > > > RP 4.4.4.4 (?), v2v1
> > > > Info source: 4.4.4.4 (?), elected via Auto-RP
> > > > Uptime: 01:56:30, expires: 00:00:29
> > > >
> > > >
> > > >
> > > > R4:
> > > >
> > > >
> > > > R4#sh ip pim rp mapp
> > > > PIM Group-to-RP Mappings
> > > > This system is an RP (Auto-RP)
> > > > This system is an RP-mapping agent
> > > >
> > > > Group(s) 224.0.0.0/4
> > > > RP 4.4.4.4 (?), v2v1
> > > > Info source: 4.4.4.4 (?), elected via Auto-RP
> > > > Uptime: 02:05:34, expires: 00:00:27
> > > > Group(s) (-)224.8.8.8/32
> > > > RP 4.4.4.4 (?), v2v1
> > > > Info source: 4.4.4.4 (?), elected via Auto-RP
> > > > Uptime: 02:05:34, expires: 00:00:27
> > > >
> > > > Shouldn't I see one for 1.1.1.1 and another for 4.4.4.4 on each
> > router?
> > > >
> > > >
> > > >
> > > > On 11/7/07, Tarun Pahuja <pahujat@gmail.com> wrote:
> > > > >
> > > > > Chris,
> > > > >
> > > > > 1) Can you see all routes on all routers? Do you have end to end
> > > > > connectivity?
> > > > > 2) You have two mapping agents in the scenario, can you see local
> > > > > mappings on each of them and on the adjoining routers? How about
> > > > > across the frame cloud?
> > > > > 3) Clear mroute table on all routers.
> > > > >
> > > > > You should be good to go!
> > > > > Tarun
> > > > >
> > > > >
> > > > > On 11/7/07, Chris Riling <criling@gmail.com> wrote:
> > > > > >
> > > > > > I fixed the RIP issue, that was my bad, but it souldn't have /
> > > > > > didn't seem to have any effect on what's going on here anyway...
> >
> > > > > > the "debug ip mpacket detail" doesn't seem to say much either...
> >
> > > > > > I did it from the router that's a member of 224.8.8.8 - in the
> > > > > > config above it was R4, but I moved it to R3 just in case there
> > > > > > was some oddity with the RP configuration, I wanted to see what
> > > > > > would happen if a totally separate router was a member, not a
> > router that is also an RP...
> > > > > >
> > > > > > *Jul 16 03:31:19.088: IP(0): MAC sa=000b.fd0c.cf80
> > > > > > (FastEthernet0/0), IP last-hop=131.1.34.4 *Jul 16 03:31:19.088 :
> >
> > > > > > IP(0): IP tos=0xC0, len=54, id=4038, ttl=3,
> > > > > > prot=17
> > > > > > *Jul 16 03:31: 19.088: IP(0): s=131.1.14.1 (FastEthernet0/0) d=
> > > > > > 224.0.1.40 (Serial0/0.32) id=4038, ttl=3, prot=17, len=54(54),
> > > > > > mforward *Jul 16 03:31:19.918: IP(0): MAC sa= 000b.fd0c.cf80
> > > > > > (FastEthernet0/0), IP last-hop=131.1.34.4 *Jul 16 03:31:19.918:
> > > > > > IP(0): IP tos=0xC0, len=54, id=3931, ttl=4,
> > > > > > prot=17
> > > > > > *Jul 16 03:31:19.918: IP(0): s= 131.1.34.4 (FastEthernet0/0)
> > > > > > d=224.0.1.40(Serial0/0.32) id=3931, ttl=4, prot=17, len=54(54),
> > > > > > mforward
> > > > > >
> > > > > > Thanks,
> > > > > > Chris
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On 11/7/07, Tarun Pahuja <pahujat@gmail.com> wrote:
> > > > > > >
> > > > > > > Chris,
> > > > > > > Please include 131.2.0.0 network under rip on router
> >
> > > > > > > number 2. For PIM to work you want to make sure that the
> > > > > > > underlying protocol is functioning properly and you have
> > proper routers in your routing table.
> > > > > > > PIM using underlying IGP to calculate RPF.
> > > > > > >
> > > > > > > HTH,
> > > > > > > Tarun
> > > > > > >
> > > > > > >
> > > > > > > On 11/7/07, Joseph Brunner < joe@affirmedsystems.com > wrote:
> > > > > > > >
> > > > > > > > Debug ip mpacket detail
> > > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
> > > > > > > > On Behalf Of Chris Riling
> > > > > > > > Sent: Wednesday, November 07, 2007 10:44 AM
> > > > > > > > To: Tarun Pahuja
> > > > > > > > Cc: groupstudy
> > > > > > > > Subject: Re: Soup-to-Nuts: MCAST Lab 5 - Auto RP with
> > > > > > > > Multiple RP's
> > > > > > > >
> > > > > > > > BTW - R4 IS receiving announcements from R1:
> > > > > > > >
> > > > > > > > *Mar 3 03:24:23.515: Auto-RP(0): Received RP-announce, from
> >
> > > > > > > > 1.1.1.1, RP_cnt 1, ht 31 *Mar 3 03:24:23.515: Auto-RP(0):
> > > > > > > > Received RP-announce, from 1.1.1.1, RP_cnt 1, ht 31
> > > > > > > >
> > > > > > > >
> > > > > > > > but I still don't see an entry for 224.8.8.8:
> > > > > > > >
> > > > > > > > R4#sh ip pim rp
> > > > > > > > Group: 224.11.11.11 , RP: 4.4.4.4, v2, v1, next RP-reachable
> >
> > > > > > > > in
> > > > > > > > 00:01:19
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Chris
> > > > > > > >
> > > > > > > >
> > > > > > > > On 11/7/07, Chris Riling < criling@gmail.com> wrote:
> > > > > > > > >
> > > > > > > > > I just labbed it up again after a night of sleep and I'm
> > > > > > > > > still
> > > > > > > > seeing the
> > > > > > > > > same thing...
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Topology:
> > > > > > > > >
> > > > > > > > > R1
> > > > > > > > > R2
> > > > > > > > > |
> > > > > > > > > |
> > > > > > > > > |
> > > > > > > > > |
> > > > > > > > > Frame 131.1.14.0/24
> > > > > > > > Frame
> > > > > > > > > 131.1.23.0/24
> > > > > > > > > |
> > > > > > > > > |
> > > > > > > > > |
> > > > > > > > > |
> > > > > > > > > R4--------------------------Ethernet
> > > > > > > > > 131.1.34.0/24-----------------------------R3
> > > > > > > > >
> > > > > > > > > Configs:
> > > > > > > > >
> > > > > > > > > R1:
> > > > > > > > >
> > > > > > > > > !
> > > > > > > > > version 12.4
> > > > > > > > > service timestamps debug datetime msec service timestamps
> > > > > > > > > log datetime msec no service password-encryption !
> > > > > > > > > hostname R1
> > > > > > > > > !
> > > > > > > > > boot-start-marker
> > > > > > > > > boot-end-marker
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > resource policy
> > > > > > > > > !
> > > > > > > > > no aaa new-model
> > > > > > > > > no network-clock-participate slot 1 no
> > > > > > > > > network-clock-participate wic 0 ip subnet-zero !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > ip cef
> > > > > > > > > ip multicast-routing
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > interface Loopback0
> > > > > > > > > ip address 1.1.1.1 255.0.0.0 ip pim sparse-dense-mode !
> > > > > > > > > interface FastEthernet0/0
> > > > > > > > > ip address 131.1.1.1 255.255.255.0 ip pim
> > > > > > > > > sparse-dense-mode ip igmp join-group 224.11.11.11 duplex
> >
> > > > > > > > > auto speed auto !
> > > > > > > > > interface Serial0/0
> > > > > > > > > no ip address
> > > > > > > > > encapsulation frame-relay no frame-relay inverse-arp !
> > > > > > > > > interface Serial0/0.14 point-to-point ip address
> > > > > > > > > 131.1.14.1 255.255.255.0 ip pim sparse-dense-mode
> > > > > > > > > frame-relay interface-dlci 104 !
> > > > > > > > > interface Serial0/1
> > > > > > > > > no ip address
> > > > > > > > > shutdown
> > > > > > > > > !
> > > > > > > > > router rip
> > > > > > > > > version 2
> > > > > > > > > network 1.0.0.0
> > > > > > > > > network 131.1.0.0
> > > > > > > > > no auto-summary
> > > > > > > > > !
> > > > > > > > > ip classless
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > ip http server
> > > > > > > > > no ip http secure-server
> > > > > > > > > ip pim send-rp-announce Loopback0 scope 5 group-list 1
> > > > > > > > > interval
> > > > > > > > 10
> > > > > > > > > ip pim send-rp-discovery scope 5 !
> > > > > > > > > access-list 1 permit 224.8.8.8 !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > control-plane
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > alias exec sir sh ip route alias exec sib sh ip bgp alias
> > > > > > > > > exec cir clear ip route * alias exec siib sh ip int brief
> > > > > > > > > | e unass !
> > > > > > > > > line con 0
> > > > > > > > > logging synchronous
> > > > > > > > > line aux 0
> > > > > > > > > line vty 0 4
> > > > > > > > > login
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > end
> > > > > > > > >
> > > > > > > > > R2:
> > > > > > > > >
> > > > > > > > > !
> > > > > > > > > version 12.4
> > > > > > > > > service timestamps debug datetime msec service timestamps
> > > > > > > > > log datetime msec no service password-encryption !
> > > > > > > > > hostname R2
> > > > > > > > > !
> > > > > > > > > boot-start-marker
> > > > > > > > > boot-end-marker
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > resource policy
> > > > > > > > > !
> > > > > > > > > no aaa new-model
> > > > > > > > > no network-clock-participate slot 1 no
> > > > > > > > > network-clock-participate wic 0 ip subnet-zero !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > ip cef
> > > > > > > > > ip multicast-routing
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > interface FastEthernet0/0
> > > > > > > > > ip address 131.2.2.2 255.255.255.0 ip pim
> > > > > > > > > sparse-dense-mode duplex auto speed auto !
> > > > > > > > > interface Serial0/0
> > > > > > > > > no ip address
> > > > > > > > > encapsulation frame-relay no frame-relay inverse-arp !
> > > > > > > > > interface Serial0/0.23 point-to-point ip address
> > > > > > > > > 131.1.23.2 255.255.255.0 ip pim sparse-dense-mode
> > > > > > > > > frame-relay interface-dlci 203 !
> > > > > > > > > interface Serial0/1
> > > > > > > > > no ip address
> > > > > > > > > shutdown
> > > > > > > > > !
> > > > > > > > > router rip
> > > > > > > > > version 2
> > > > > > > > > network 131.1.0.0
> > > > > > > > > no auto-summary
> > > > > > > > > !
> > > > > > > > > ip classless
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > ip http server
> > > > > > > > > no ip http secure-server
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > control-plane
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > alias exec sir sh ip route alias exec sib sh ip bgp alias
> > > > > > > > > exec cir clear ip route * alias exec siib sh ip int brief
> > > > > > > > > | e unass !
> > > > > > > > > line con 0
> > > > > > > > > logging synchronous
> > > > > > > > > line aux 0
> > > > > > > > > line vty 0 4
> > > > > > > > > login
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > end
> > > > > > > > >
> > > > > > > > > R3:
> > > > > > > > >
> > > > > > > > > !
> > > > > > > > > version 12.4
> > > > > > > > > service timestamps debug datetime msec service timestamps
> > > > > > > > > log datetime msec no service password-encryption !
> > > > > > > > > hostname R3
> > > > > > > > > !
> > > > > > > > > boot-start-marker
> > > > > > > > > boot-end-marker
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > resource policy
> > > > > > > > > !
> > > > > > > > > no aaa new-model
> > > > > > > > > no network-clock-participate slot 1 no
> > > > > > > > > network-clock-participate wic 0 !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > ip cef
> > > > > > > > > ip multicast-routing
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > interface FastEthernet0/0
> > > > > > > > > ip address 131.1.34.3 255.255.255.0 ip pim
> > > > > > > > > sparse-dense-mode duplex auto speed auto !
> > > > > > > > > interface Serial0/0
> > > > > > > > > no ip address
> > > > > > > > > encapsulation frame-relay no dce-terminal-timing-enable
> >
> > > > > > > > > no frame-relay inverse-arp frame-relay lmi-type ansi !
> > > > > > > > > interface Serial0/0.32 point-to-point ip address
> > > > > > > > > 131.1.23.3 255.255.255.0 ip pim sparse-dense-mode
> > > > > > > > > frame-relay interface-dlci 302 !
> > > > > > > > > interface Serial0/1
> > > > > > > > > no ip address
> > > > > > > > > shutdown
> > > > > > > > > no dce-terminal-timing-enable !
> > > > > > > > > router rip
> > > > > > > > > version 2
> > > > > > > > > network 131.1.0.0
> > > > > > > > > no auto-summary
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > ip http server
> > > > > > > > > no ip http secure-server
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > control-plane
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > alias exec sir sh ip route alias exec sib sh ip bgp alias
> > > > > > > > > exec cir clear ip route * alias exec siib sh ip int brief
> > > > > > > > > | e unass !
> > > > > > > > > line con 0
> > > > > > > > > logging synchronous
> > > > > > > > > line aux 0
> > > > > > > > > line vty 0 4
> > > > > > > > > login
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > end
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > R4:
> > > > > > > > >
> > > > > > > > > !
> > > > > > > > > version 12.4
> > > > > > > > > service timestamps debug datetime msec service timestamps
> > > > > > > > > log datetime msec no service password-encryption !
> > > > > > > > > hostname R4
> > > > > > > > > !
> > > > > > > > > boot-start-marker
> > > > > > > > > boot-end-marker
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > resource policy
> > > > > > > > > !
> > > > > > > > > no aaa new-model
> > > > > > > > > no network-clock-participate slot 1 no
> > > > > > > > > network-clock-participate wic 0 ip subnet-zero !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > ip cef
> > > > > > > > > ip multicast-routing
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > interface Loopback0
> > > > > > > > > ip address 4.4.4.4 255.0.0.0 ip pim sparse-dense-mode !
> > > > > > > > > interface FastEthernet0/0
> > > > > > > > > ip address 131.1.34.4 255.255.255.0 ip pim
> > > > > > > > > sparse-dense-mode ip igmp join-group 224.8.8.8 duplex
> > > > > > > > > auto speed auto !
> > > > > > > > > interface Serial0/0
> > > > > > > > > no ip address
> > > > > > > > > encapsulation frame-relay no frame-relay inverse-arp
> > > > > > > > > frame-relay lmi-type ansi !
> > > > > > > > > interface Serial0/0.41 point-to-point ip address
> > > > > > > > > 131.1.14.4 255.255.255.0 ip pim sparse-dense-mode
> > > > > > > > > frame-relay interface-dlci 401 !
> > > > > > > > > interface Serial0/1
> > > > > > > > > no ip address
> > > > > > > > > shutdown
> > > > > > > > > !
> > > > > > > > > router rip
> > > > > > > > > version 2
> > > > > > > > > network 4.0.0.0
> > > > > > > > > network 131.1.0.0
> > > > > > > > > no auto-summary
> > > > > > > > > !
> > > > > > > > > ip classless
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > ip http server
> > > > > > > > > no ip http secure-server
> > > > > > > > > ip pim send-rp-announce Loopback0 scope 5 group-list 1
> > > > > > > > > interval
> > > > > > > > 10
> > > > > > > > > ip pim send-rp-discovery scope 5 !
> > > > > > > > > access-list 1 deny 224.8.8.8
> > > > > > > > > access-list 1 permit 224.0.0.0 15.255.255.255 !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > control-plane
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > alias exec sir sh ip route alias exec sib sh ip bgp alias
> > > > > > > > > exec cir clear ip route * alias exec siib sh ip int brief
> > > > > > > > > | e unass !
> > > > > > > > > line con 0
> > > > > > > > > logging synchronous
> > > > > > > > > line aux 0
> > > > > > > > > line vty 0 4
> > > > > > > > > login
> > > > > > > > > !
> > > > > > > > > !
> > > > > > > > > end
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Thanks,
> > > > > > > > > Chris
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On 11/7/07, Tarun Pahuja < pahujat@gmail.com> wrote:
> > > > > > > > > >
> > > > > > > > > > Chris,
> > > > > > > > > > Sure post the config, 30 seconds response time
> >
> > > > > > > > > > might
> > > > > > > > be
> > > > > > > > > > difficult since we are in totally different time zone. I
> > > > > > > > promise a
> > > > > > > > Timely
> > > > > > > > > > response.
> > > > > > > > > > Thanks,
> > > > > > > > > > Tarun
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On 11/7/07, Chris Riling < criling@gmail.com> wrote:
> > > > > > > > > >
> > > > > > > > > > > Hey Guys,
> > > > > > > > > > >
> > > > > > > > > > > I got the topology working okay, and I joined
> > > > > > > > > > > each of
> > > > > > > > the groups
> > > > > > > > > > > on 1
> > > > > > > > > > > router using "ip igmp join-group" and when I ping the
> > > > > > > > > > > group
> > > > > > > > addresses
> > > > > > > > > > > and do
> > > > > > > > > > > a "sh ip pim rp" on another router, the RP for one of
> > > > > > > > > > > the
> > > > > > > > groups shows
> > > > > > > > > > > up,
> > > > > > > > > > > but not the other... anyone seen this happen? If it's
> > > > > > > > > > > not
> > > > > > > > something
> > > > > > > > > > > you can
> > > > > > > > > > > can answer in like 30 seconds I can post the config :)
> > > > > > > > > > >
> > > > > > > > > > > Thanks,
> > > > > > > > > > > Chris
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > >
> > > > > > > > ____________________________________________________________
> > > > > > > > ___________
> > > > > > > > > > > Subscription information may be found at:
> > > > > > > > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > > > > >
> > > > > > > >
> > > > > > > > ____________________________________________________________
> > > > > > > > ___________ Subscription information may be found at:
> > > > > > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > > ______________________________________________________________________
> > > _ Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART