RE: How to use WIC2T with opposite type of connectors in

From: Antonio Soares (amsoares@netcabo.pt)
Date: Fri Nov 09 2007 - 15:00:05 ART

Next message: Alex Steer: "static mroute in lab"
Previous message: Bob Sinclair: "Re: IGMPsnooping"
Maybe in reply to: Muhammad Saleem: "How to use WIC2T with opposite type of connectors in"
Next in thread: Muhammad Saleem: "RE: How to use WIC2T with opposite type of connectors in"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

You can use two cables to do that or use crossover cables like these:

You can find them on e-bay too.

Regards,

Antonio Soares
CCIE #18473 (R&S),CCNP,CCIP,JNCIA-ER
http://pwp.netcabo.pt/amsoares/

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Muhammad Saleem
Sent: sexta-feira, 9 de Novembro de 2007 17:33
To: ccielab@groupstudy.com
Subject: How to use WIC2T with opposite type of connectors in Frame-relay
environment?

Dear Expert,

I have Cisco 2610XM router with one WIC2T and one WIC1T, from WIC2T both
interfaces are HD Smart Serial, and two cables with HD Smart Serial
connector End (DCE) that can only go to that router and other End of these
cables have DB60 connector (DTE) that can only go to frame-relay switches.

How can I use these cables with frame-relay switch while cables have
opposite type of connectors?

saleem

Next message: Alex Steer: "static mroute in lab"
Previous message: Bob Sinclair: "Re: IGMPsnooping"
Maybe in reply to: Muhammad Saleem: "How to use WIC2T with opposite type of connectors in"
Next in thread: Muhammad Saleem: "RE: How to use WIC2T with opposite type of connectors in"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART