From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Thu Nov 01 2007 - 01:06:01 ART
Hey Jerry,
Since no one else chimed in, I'll offer you this:
I cannot say for certain I've pushed one of these to a full 8 Mbps, but I
wouldn't be concerned at all. What I have done on several occasions is
pretty much fill a 52 Mbps HSSI pipe on a Cisco box. I don't think HSSI
ever enjoyed a wide deployment, but it's a fairly high-speed serial data
service with discrete clock signals, control leads, and everything (unlike a
plesiochronous T-3 type of service which does not involve a discrete clock
or control leads along side of the data). I think if Cisco figured out how
to build a solid 52 Mbps serial card, they probably also built a pretty
stable 8 Mbps card (yes, the cable specs, etc are much more stringent for
HSSI, but you get the point).
Regards,
Scott
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/hssi.htm
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
jerry.du@accenture.com
Sent: Wednesday, October 31, 2007 10:28 AM
To: ccielab@groupstudy.com
Subject: OT: WIC-2T support 8M per interface
Hi, GS,
As I know, US standard T1 is 1.544 Mbps and Europe standard E1 is 2.048
Mbps. However, I noted Cisco WIC-2T is able to support up to 8Mbps per
interface. Had anyone in this group tried to full utilized 8Mbps in this
interface? How the stability?
http://www.cisco.com/warp/public/107/wic-2t.shtml
Regards,
Jerry
This message is for the designated recipient only and may contain
privileged, proprietary, or otherwise private information. If you have
received it in error, please notify the sender immediately and delete the
original. Any other use of the email by you is prohibited.
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:27 ART