From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Tue Oct 30 2007 - 17:22:01 ART
Hi,
Is capture supported by the GUI? I've tried that in the past but really
didn't find it very useful (it'll get a very basic config up but it hinders
you from doing advanced stuff such as, well, capture). Normally capture is
initiated and terminated from the Dynagen CLI.
As for traffic generation, that's not really a feature of Dynamips. You can
do the Brian Dennis trick of setting your ping timeout to zero and crank out
some pretty heavy ICMP traffic (I recently pegged a 6504's CPU to just shy
of 100% with that little gem!). Also there are some multicast tricks. But
if you just want to do an iperf kind of thing, you'll need to accommodate
that in your VM or physical setup somehow.
Regards,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Vinod Lodhi
Sent: Tuesday, October 30, 2007 1:04 PM
To: 'groupstudy'
Subject: Help needed on Dynamips: Traffic Analyser and Generator
Hi All,
I'm using Dynamips for CCIE preparation. I wanted to analyse the traffic
thru 'Ethreal' for setup running on DynamipsGUI 2.8 and also if I can you
some traffic generator also to generate traffic. I appreciate any help.
Thanks in advance.
Thanks!!
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:19 ART