From: Phillips, Kevin (Kevin.Phillips@FTIConsulting.com)
Date: Sun Oct 28 2007 - 22:31:30 ART
My co-worker and I are both using the same program and had the same
questions about IEWB Vol 1 v4.1
We had spent a lot of time setting up the physical lab as documented in
numerous locations but as we started to work through the WB we found
that the physical topology changes from exercise to exercise.
I had actually just emailed ineternetworkexpert.com about this question
this past week and just got an answer back Friday evening.
From the answer I got it is my understanding that IEWB Vol1 v4.1 is used
to fill in the gaps, yes the physical topology changes from exercise to
exercise and doesn't actually follow the true lab physical topology
until you get to IEWB Vol 2.
IEWB Vol 1 if you walk through it builds upon the basics, where exercise
1 is BGP peering and shows you the debug and what is actually going on
within the packets. The next exercises change the physical topology as
you build upon the basics.
Kevin
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Steven Hodgson
Sent: Sunday, October 28, 2007 11:15 AM
To: ccielab@groupstudy.com
Subject: Newb question about IEWB topology and labs
I have searched the archives, but can't find the answer to this
question.
I am just starting my studies and am using IEWB Vol 1 v4.1. Some of the
lab
questions show equipment to be directly connected but in the lab
topology
diagram they are not directly connected. This has me scratching my head
as
I thought the topology never changes. Can someone help shed some light
on
what I'm doing wrong?
Thanks
Steve
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:19 ART