From: Herbert Maosa (asawilunda@googlemail.com)
Date: Mon Oct 22 2007 - 06:14:21 ART
You dont need to explicitly configure metric when redistributing from one
EIGRP process to another EIGRP process. The metrics from the other process
carry over, and will be understood by the recieving eigrp process.
On 10/22/07, Sachin Bhatia <sachin.bhatia21@gmail.com> wrote:
>
> Hope u get the point wt Donghai mentioned:
> for ur config to work u shud hve smething like:
> R1
> *Router eigrp 10*
> Red eigrp 100 B, D, R, L, M
> Network 1.1.1.1 0.0.0.0
> Net 150.1.1.1 0.0.0.0
> Net 4.4.100.1 0.0.0.0
>
> *Router eigrp 100
> *Red eigrp 10 B, D, R, L, M
> Net 2.2.2.2 0.0.0.0
> Net 4.4.100.2 0.0.0.0
>
> remembr to filter if there are mre than 1 red points.
>
> HTH.
> Sachin
>
>
>
>
> On 10/22/07, Donghai Zhang <zdh1207@gmail.com> wrote:
> >
> > Dear,
> > No redistribution occur if two different routing protocol processes are
> > run
> > on the same router.So you have to activate eirgrp 10 on R2 or activate
> > eigrp
> > 100 on R1, otherwide the redistribution would not work.
> >
> > 2007/10/22, raul raul <juvenn@hotmail.com>:
> > >
> > > you need to include metric for eigrp redistribution
> > >
> > > example
> > >
> > > eigrp 10
> > > redistribute eigrp 100 subnet metric 1000 100 255 1 1500
> > > > From: scott_ccie_list@it-ag.com> To: Cecil.Wilson@flextronics.com;
> > > joe@affirmedsystems.com; gary.duncanson@googlemail.com;
> > > anthony.sequeira@thomson.com> CC: ccielab@groupstudy.com> Subject: RE:
> > > Help with Eigrp redistribution> Date: Sun, 21 Oct 2007 15:14:43 -0600>
> >
> > Hey
> > > Cecil,> > You have EIGRP enabled via 'net 4.4.100.1 0.0.0.0' on R1 and
> > the
> > > same for> the .2 on R2. But EIGRP requires that the AS number be
> common
> > > between the> two routers; it is not simply a process ID, such as the
> > case w/
> > > OSPF. So> presumably you aren't seeing an adjacency coming up between
> > these
> > > two> routers, no?> > Regards,> > Scott> > -----Original Message----->
> > From:
> > > nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of>
> Cecil
> > > Wilson> Sent: Sunday, October 21, 2007 2:54 PM> To: Joseph Brunner;
> Gary
> > > Duncanson; anthony.sequeira@thomson.com> Cc: ccielab@groupstudy.com>
> > > Subject: Help with Eigrp redistribution> > Hello GS> I am having
> > problems
> > > redistrinte a subnet from eigrp into the routing> t!
> > > able example> > R1 > Router eigrp 10> Red eigrp 100 > Network 1.1.1.1
> > > 0.0.0.0 > Net 150.1.1.1 0.0.0.0> Net 4.4.100.1 0.0.0.0 > > R2> Router
> > > eigrp 100> Red eigrp 10> Net 2.2.2.2 0.0.0.0> Net 4.4.100.2 0.0.0.0> >
> > Sho
> > > ip ro ? No network 150.1.1.0> I played with the metric but can not get
> > to
> > > see the 150.1.1.0 network on> the other routers?> Can someone tell me
> > what
> > > I maybe missing, how to get this network to> redistribute?> Thanks> >
> >
> > > Cecil G. Wilson > IT Network Services > Office: (901) 215-2710 > Cell:
> > (901)
> > > 601-6201 > VoIP 104-2710> FLEX Logistics> cecil.wilson@flextronics.com>
> > >
> > > -----Original Message-----> From: nobody@groupstudy.com [mailto:
> > > nobody@groupstudy.com] On Behalf Of> Joseph Brunner> Sent: Saturday,
> > > October 20, 2007 10:28 AM> To: 'Gary Duncanson';
> > > anthony.sequeira@thomson.com> Cc: ccielab@groupstudy.com> Subject: RE:
> > > interesting> > Another thing guys,> > Many job Interviews I have been
> > asked
> > > what rfc's I have read lately?> What are my favorites?> > Cool huh?> >
> !
> > > -----Original Message-----> From: nobody@groupstudy.com [mailt!
> > > o:nobody
> > >
> > > @groupstudy.com] On Behalf Of> Gary Duncanson> Sent: Saturday, October
> > 20,
> > > 2007 11:19 AM> To: anthony.sequeira@thomson.com> Cc:
> > > ccielab@groupstudy.com> Subject: Re: interesting> > Anthony,> > That's
> > > very true.> > Gary> ----- Original Message -----> From: <
> > > anthony.sequeira@thomson.com>> To: <shiranp3@gmail.com>; <
> > > ccielab@groupstudy.com>> Sent: Saturday, October 20, 2007 3:05 PM>
> > > Subject: RE: interesting> > > > That is awesome! > > > > It is amazing
> > how
> > > many of the RFCs are critical to read. For the CCIE> > Written, I find
> > that
> > > many of the questions come directly from these> > documents. I also
> find
> > > that much of the "documentation" you see out> > there these days is
> > almost a
> > > cut and paste from the original RFC. > > > > Anthony J Sequeira> >
> > #15626> >
> > > Don't Cheat Yourself - Learn> >
> > > http://www.netmasterclass.com/CCIE/Self-Paced-Program/Written/> > > >
> > > -----Original Message-----> > From: nobody@groupstudy.com [mailto:
> > > nobody@groupstudy.com] On Behalf> Of> > shiran guez> > Sent: S!
> > > aturday, October 20, 2007 9:25 AM> > To: Cisco certification> >
> Subject:
> > > interesting> > > > Today I went trough RFC 2281 Cisco Hot standby
> router
> > > protocol (HSRP)> > > > and what was interesting is that although it is
> > Cisco
> > > HSRP, it was> > written> > by 2 Juniper and 2 Cisco People.> > I think
> > it
> > > should be called JUCI HSRP :-)> > > > -- > > Shiran Guez> > MCSE CCNP
> > NCE1>
> > > > http://cciep3.blogspot.com> > http://www.linkedin.com/in/cciep3> > >
> > >>
> > >
> _______________________________________________________________________>
> > >
> > > Subscription information may be found at: > >
> > > http://www.groupstudy.com/list/CCIELab.html> > > >>
> > >
> _______________________________________________________________________>
> > >
> > > Subscription information may be found at: > >
> > > http://www.groupstudy.com/list/CCIELab.html> >
> > >
> _______________________________________________________________________>
> > > Subscription information may be found at: >
> > > http://www.groupstudy.com/list/CCIELab.html> >
> > > ____________________________________!
> > > ___________________________________> Subscription information !
> > > may be f
> > >
> > > ound at: > http://www.groupstudy.com/list/CCIELab.html> > Legal
> > > Disclaimer:> The information contained in this message may be
> privileged
> > > and> confidential. It is intended to be read only by the individual or
> > > entity to> whom it is addressed or by their designee. If the reader of
> > this
> > > message is> not the intended recipient, you are on notice that any
> > > distribution of this> message, in any form, is strictly prohibited. If
> > you
> > > have received this> message in error, please immediately notify the
> > sender
> > > and delete or destroy> any copy of this message> >
> > >
> _______________________________________________________________________>
> > > Subscription information may be found at: >
> > > http://www.groupstudy.com/list/CCIELab.html> >
> > >
> _______________________________________________________________________>
> > > Subscription information may be found at: >
> > > http://www.groupstudy.com/list/CCIELab.html
> > > _________________________________________________________________
> > > Express yourself with the latest Windows Live Messenger! Get it free
> > > today!
> > > http://www.get.live.com/wl/all
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:17 ART