Re: ip cef command Is it just dynamips?

From: Sander Habraken (sanderhabraken@gmail.com)
Date: Wed Oct 17 2007 - 17:15:41 ART

• Next message: Aminul Siddiqui: "Re: Logging routing table changes"
• Previous message: John: "TFTP QOS with NBAR"
• Maybe in reply to: John: "ip cef command Is it just dynamips?"
• Next in thread: Ronnie Angello: "Re: ip cef command Is it just dynamips?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi John,

As far as I can tell this is real life. IP cef is enabled in global config
mode. The only thing you can configure on an interface is IP cef accounting
for example. So it explains the reason why it jumps back to global config
mode.

I have attached the link of the doc cd for your pleasure.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hisw_r/ips_a1h.htm#wp1152991

Regards,

Sander

2007/10/17, John <jgarrison1@austin.rr.com>:
>
> When I enable ip cef on an interface it kicks me out of interface
> configuration mode to config mode. Just curious if this is just a
> dynamips
> bug, or if this happens in the "real world"
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Aminul Siddiqui: "Re: Logging routing table changes"
• Previous message: John: "TFTP QOS with NBAR"
• Maybe in reply to: John: "ip cef command Is it just dynamips?"
• Next in thread: Ronnie Angello: "Re: ip cef command Is it just dynamips?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART