From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Wed Oct 17 2007 - 17:27:59 ART
CEF can be enabled/disabled on a per interface basis with the ip route-cache
cef/no ip route-cache cef command.
On 10/17/07, Sander Habraken <sanderhabraken@gmail.com> wrote:
>
> Hi John,
>
> As far as I can tell this is real life. IP cef is enabled in global config
> mode. The only thing you can configure on an interface is IP cef
> accounting
> for example. So it explains the reason why it jumps back to global config
> mode.
>
> I have attached the link of the doc cd for your pleasure.
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hisw_r/ips_a1h.htm#wp1152991
>
> Regards,
>
> Sander
>
>
> 2007/10/17, John <jgarrison1@austin.rr.com>:
> >
> > When I enable ip cef on an interface it kicks me out of interface
> > configuration mode to config mode. Just curious if this is just a
> > dynamips
> > bug, or if this happens in the "real world"
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Ronald Angello CCIE #17846
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART