From: Cisco Nuts (cisconuts@hotmail.com)
Date: Thu Oct 11 2007 - 23:13:25 ART
Hi:
Have a question when setting the mpls exp bits inbound on a PE router for
packets coming from the CE:
If I set both; mpls exp 5 as well as mpls exp imposition 5, should I be seeing
both of this set in the policy-map inbound?
Presently, I am only seeing one: either mpls exp imposition 5 or mpls exp 5
regardless if I set up both: only the last one entered takes effect.
So if I want to match both the vpn and the transport label, which one should I
set and how?
Thx.
r9#sh policy-map int
Serial0/2
Service-policy input: FROM_R2
Class-map: DSCP_EF (match-all)
29 packets, 1330 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name DSCP
QoS Set
mpls experimental imposition 5
Packets marked 29
Class-map: class-default (match-any)
11 packets, 1096 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
r9#sh access-list
Extended IP access list DSCP
10 permit ip any any dscp ef (29 matches)
r9#
r9#sh policy-map
Policy Map FROM_R2
Class DSCP_EF
set mpls experimental 5
r9#
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:14 ART