From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Oct 09 2007 - 23:28:18 ART
When a policy-map is applied to the subinterface you are doing
per-VC queueing. Since a single VC can only be applied to one interface at
a time (main interface or subinterface) only the policy applied to that VC
or interface where the VC is assigned applies.
HTH,
Brian McGahan, CCIE #8593 (R&S/SP/Security)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Wilson, Ryan # Atlanta
> Sent: Tuesday, October 09, 2007 6:05 PM
> To: ccielab@groupstudy.com
> Subject: QoS CBTS Question
>
> I have a question in reference to CB shaping on a frame-relay sub
> interface that I'm finding a little perplexing.
>
> What if, you have a service-policy on the sub-interface that has fair
> queuing in the default class of the policy-map and fair queuing also
> running on the main interface? It seems that traffic would be subjected
> to fair queuing in the policy-map then again on the main interface. Is
> this true?
>
>
>
>
>
> Ryan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:13 ART