From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Tue Oct 09 2007 - 19:09:46 ART
I think this is what you're looking for. BTW, this should be fixed in RC2,
which has not yet been released but hopefully will be soon, as it will
include some other good fixes as well...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Con
Spathas
Sent: Sunday, October 07, 2007 4:59 AM
To: 'ccie.lab'; 'Sohail Nedaria'
Cc: ccielab@groupstudy.com
Subject: RE: Dynamips - cannot save vlan.dat
It seems to have started with the latest release.
Workaround can be found here:
http://7200emu.hacki.at/viewtopic.php?t=3864&highlight=flash+filesystem
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie.lab
Sent: Sunday, 7 October 2007 06:01
To: Sohail Nedaria
Cc: ccielab@groupstudy.com
Subject: Re: Dynamips - cannot save vlan.dat
Here is what I get, still no vlan.dat after reboot and I erased flash like
you said.
Rack1SW1#vlan d
Rack1SW1(vlan)#vlan 6
VLAN 6 added:
Name: VLAN0006
Rack1SW1(vlan)#exit
APPLY completed.
Exiting....
Rack1SW1#dir
Directory of flash:/
No files in directory
8388604 bytes total (8387880 bytes free) Rack1SW1#sh fla
System flash directory:
File Length Name/status
1 660 vlan.dat [invalid checksum]
[724 bytes used, 8387880 available, 8388604 total] 8192K bytes of processor
board System flash (Read/Write)
Rack1SW1#sh vlan-sw
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
1 default active Fa1/0, Fa1/1, Fa1/2, Fa1/4
Fa1/6, Fa1/8, Fa1/10, Fa1/11
Fa1/12, Fa1/13, Fa1/14
6 VLAN0006 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
----- Original Message -----
From: Sohail Nedaria
To: ccie.lab
Cc: ccielab@groupstudy.com
Sent: Sunday, October 07, 2007 12:48 AM
Subject: Re: Dynamips - cannot save vlan.dat
HI
Try the following command on ur router,
SW1#erase flash
SW1#vlan.dat
SW1# (then try to create ur vlan)
Thanks
Suhail.
On 10/7/07, ccie.lab <ccie.lab@verizon.net> wrote:
I am trying to use the switch module in the dynamips setup with a 3640
router.
However, I cannot get the vlan.dat to save between sessions. I notice
when
the vlan.dat is created it says invalid checksum?
Then it is gone after rebooting Dyanmips?
Please Help!
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:13 ART