From: xdsgrrr (xdsgrrr@consultcommerce.com)
Date: Tue Oct 02 2007 - 04:58:16 ART
Check with show interface trunk and see that evrything is ok with vlan
1 :)) and use show spanning-tree vlan 1 br to verify that port is in
forwarding state for this vlan
br,
Atanas Yankov
On Tue, 2007-09-25 at 11:26 +0200, Navid Daghighi wrote:
> Hi,
>
> In this simple example, where I configured a mismatch native vlan :
>
> sw 1 : dot1Q, native vlan = 1
> sw 2 : dot1Q, native vlan = 2
>
> SH IP INT BRIEF shows that :
> fa0/x stays up/up
> vlan1 goes up/down
>
> What is the logic behind this behavior ?
> I would have expected the fa0/x to go up/down !
>
> Thanks,
> Navid
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:11 ART