From: ISolveSystems (support@isolvesystems.com)
Date: Thu Sep 27 2007 - 23:04:46 ART
R6 connects to R9 via Serial using IPv4 address. R6(104.69.69.6); R9(
104.69.69.9)
R6 Lo1 - 3333:6:6:6::6
R9 Lo1 - 3333:9:9:9::9
Task asks to configure IPv6 NAT over the serial link. Lo1 int should be
able to ping each other using IPv4 address from the shared subnet. Do not
use Overload.
Below is the config. Any idea why it doesn't work?
R6
ipv6 nat v6v4 source 3333:6:6:6::6 104.69.69.16
R9
ipv6 nat v6v4 source 3333:9:9:9::9 104.69.69.19
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART