From: Herbert Maosa (asawilunda@googlemail.com)
Date: Wed Sep 26 2007 - 16:38:29 ART
The way to configure priority queuing on the Catalyst is by configuring the
priority queue by way of the priority-queue out interface command, and not
by using LLQ in MQC.
Herbert.
On 9/26/07, Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
>
> Hey Guys,
>
> So i am bit confised about this and would appreciate some comments please.
>
> So on the 3550/3560s, I could enable priority queueing on one the 4
> output queues on the port by issuing the interface configuration
> command: priority-queue out
>
> Now, if i had configured an LLQ on an MQC Policy map and had applied
> it to the interface, how does the two attributes affect packets
> exitting this port please?
>
> I know its abit vague, but any information to incline my line of
> though would be great....
>
> Thanks!!
>
> Sadiq
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kindest regards, hm
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART