PPPoE

From: iosluver@gmail.com
Date: Wed Sep 19 2007 - 10:48:38 ART

• Next message: Biggs, Jeff \(M/CIO/BIE\): "RE: Reverse Telnet issue"
• Previous message: Gregory Gombas: "Re: STP and Routing questions"
• Next in thread: Shine Joseph: "RE: PPPoE"
• Maybe reply: Shine Joseph: "RE: PPPoE"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello Gents,

I was wondering if someone could direct me to a good resource for PPPoE(CCO or other).I was fooling around with a scenario I saw in InternetWorkexpert IE WB v3 VOL 2 (Lab 7 Task 3.2). I'm assumming(correct me if otherwise) that the IOS used at that time for the solution was 12.3, I'm uing 12.4. Does any one know whether the commands used for vpdn configuration have changed?

eg.

Interface virtual-template 1
ip address 144.1.34.4 255.255.255.0
 peer default ip address dhcp-pool PPPoE

vpdn-group 1
accept-dialin
virtual-template 43 (Once I enter this I get the following message)

% PPPoE config from vpdn-group is converted to pppoe-profile based config.
% Continue PPPoE configuration under 'bba-group pppoe global'

This is added to the config even though I didn' key in in.

bba-group pppoe global
 virtual-template 1

Your input will be greaty appreciated.

Thanks

• Next message: Biggs, Jeff \(M/CIO/BIE\): "RE: Reverse Telnet issue"
• Previous message: Gregory Gombas: "Re: STP and Routing questions"
• Next in thread: Shine Joseph: "RE: PPPoE"
• Maybe reply: Shine Joseph: "RE: PPPoE"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:13 ART