From: Gregory Gombas (ggombas@gmail.com)
Date: Wed Sep 19 2007 - 10:34:23 ART
Its hooked up to your aux port right? Can you show the configuration
of the aux port?
I think you may need to specify transport input telnet...
On 9/19/07, Biggs, Jeff (M/CIO/BIE) <JBiggs@usaid.gov> wrote:
> Have a 3845 that I am trying to use to reverse telnet into another 3845.
> I get the following:
>
> TEST-CRR01#tel 10.1.1.254 2001
>
> Trying 10.1.1.254, 2001 ... Open
>
>
>
> But cannot get any further. I have tried a myriad of command setups and
> looked over many Cisco webpages on this, but no luck. Anyone have
> similar experiences with this platform? I do this on other platforms
> with no issues, just seems to be the 3845.
>
>
>
> Thanks,
>
>
>
> Jeffrey Biggs
>
> Sr. Network Engineer
>
> M/CIO/BIE
>
> CCNP, CCDA
>
> 240-646-5003
>
> jbiggs@usaid.gov <mailto:jbiggs@usaid.gov>
>
>
>
> This e-mail is intended for the addressee only. If you are not the
> intended recipient, please be aware that the unauthorised use or
> disclosure of the information it contains, or the unauthorised copying
> or re-transmission of the e-mail are strictly prohibited. Such action
> may result in legal proceedings. If the e-mail has been sent to you in
> error, please accept our apologies, advise the sender as soon as
> possible and then delete the message. Under the Freedom of Information
> Act 2000 / Data Protection Act 1998, the contents of this e-mail,
> whether it is marked confidential or otherwise, may be disclosed.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:13 ART