RE: Initial configuration in real lab

From: Shine Joseph (shinepjoseph@iprimus.com.au)
Date: Mon Sep 17 2007 - 19:36:04 ART

• Next message: Joseph Brunner: "RE: My way vs Their Way"
• Previous message: Roman Rodichev: "RE: Brian McGahan's CCIE-SP Online Training .........."
• Maybe in reply to: Shine Joseph: "Initial configuration in real lab"
• Next in thread: Greg Wendel: "Re: Initial configuration in real lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks guys for all the input.

Any suggestions for spotting the issues that might have been introduced
deliberately for the purpose of troubleshooting.

I have a list here. Do I need to add anything more to this list?
1.Config-register settings
2.save initial configs for reference
3.time saving measures eg
  no ip domain-lookup
  logging synchronous on console
  privilege level 15 on console
4.status of services, ip cef etc..
5.sh run | in router|duplex|speed|monitor|ip address|access-|logging

I am going to the lab for my first attempt in 6 weeks. As of now I am with
full of confidence and a positive attitude.

Regards,
Shine

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Joe
Mama
Sent: Tuesday, 18 September 2007 6:38 AM
To: Shine Joseph
Cc: ccielab@groupstudy.com
Subject: Re: Initial configuration in real lab

Hello Shine,

The routers will have a basic config on them. There may be routers
(backbone) that are already fully configured and you may not have
access to them.

Regards,
Joe

On 9/17/07, Shine Joseph <shinepjoseph@iprimus.com.au> wrote:
> Folks,
>
>
>
> Sorry, if this was answered earlier.
>
>
>
> Can anybody tell without violating the NDA, if the routers and switches in
> the lab are loaded with the initial config or is it like the vendor labs?
> You get the raw switch/router and the initial configuration files
separately
> and you load them on to the devices?
>
>
>
> In either case, what's the best approach to check the initial
configuration
> issues that they might have intentionally introduced?
>
>
>
> I am thinking of running a show command to spot this.
>
> Sh run | in router|monitor|ip address|access-
>
>
>
> Any pointers welcome.
>
>
>
> TIA,
>
> Shine
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Joseph Brunner: "RE: My way vs Their Way"
• Previous message: Roman Rodichev: "RE: Brian McGahan's CCIE-SP Online Training .........."
• Maybe in reply to: Shine Joseph: "Initial configuration in real lab"
• Next in thread: Greg Wendel: "Re: Initial configuration in real lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART