From: Greg Wendel (gwendel@gmail.com)
Date: Mon Sep 17 2007 - 21:04:05 ART
Shine,
One thing I would add is
logging buffered debugging
so that you can see any messages when you leave and return to the router.
Greg,
On 9/17/07, Shine Joseph <shinepjoseph@iprimus.com.au> wrote:
>
> Thanks guys for all the input.
>
> Any suggestions for spotting the issues that might have been introduced
> deliberately for the purpose of troubleshooting.
>
> I have a list here. Do I need to add anything more to this list?
> 1.Config-register settings
> 2.save initial configs for reference
> 3.time saving measures eg
> no ip domain-lookup
> logging synchronous on console
> privilege level 15 on console
> 4.status of services, ip cef etc..
> 5.sh run | in router|duplex|speed|monitor|ip address|access-|logging
>
> I am going to the lab for my first attempt in 6 weeks. As of now I am with
> full of confidence and a positive attitude.
>
> Regards,
> Shine
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Joe
> Mama
> Sent: Tuesday, 18 September 2007 6:38 AM
> To: Shine Joseph
> Cc: ccielab@groupstudy.com
> Subject: Re: Initial configuration in real lab
>
> Hello Shine,
>
> The routers will have a basic config on them. There may be routers
> (backbone) that are already fully configured and you may not have
> access to them.
>
> Regards,
> Joe
>
> On 9/17/07, Shine Joseph <shinepjoseph@iprimus.com.au> wrote:
> > Folks,
> >
> >
> >
> > Sorry, if this was answered earlier.
> >
> >
> >
> > Can anybody tell without violating the NDA, if the routers and switches
> in
> > the lab are loaded with the initial config or is it like the vendor
> labs?
> > You get the raw switch/router and the initial configuration files
> separately
> > and you load them on to the devices?
> >
> >
> >
> > In either case, what's the best approach to check the initial
> configuration
> > issues that they might have intentionally introduced?
> >
> >
> >
> > I am thinking of running a show command to spot this.
> >
> > Sh run | in router|monitor|ip address|access-
> >
> >
> >
> > Any pointers welcome.
> >
> >
> >
> > TIA,
> >
> > Shine
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Gregory Wendel Springfield VA, 22153
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART