From: Jorge Martinez (jorge_bgp@yahoo.com)
Date: Mon Sep 17 2007 - 11:42:42 ART
I think it depends if you are using a 3550 or a 3560
...
What I've seen, reflector port is on a 3550 ....
--- Ben <bmunyao@gmail.com> wrote:
> Akaradeth,
>
> IMO
>
> 2)
>
> Sw1#
>
> Monitor session 1 source vlan 100 rx
>
> Monitor session 1 destination remote vlan 999
>
>
>
> Sw2#
>
> Monitor session 1 source vlan 100
>
> Monitor session 1 source remote vlan 999
>
> Monitor session 1 destination int fa0/10
>
>
> HTH
> Ben
>
>
>
> On 9/17/07, Vijay Yadav <vijay@vijayyadav.com>
> wrote:
> >
> > Hi,
> >
> >
> > According to me below mentioned configuration will
> work:
> >
> > Sw1#
> >
> > Monitor session 1 source vlan 100 rx
> >
> > Monitor session 1 destination remote vlan 999
> reflect fa0/19
> >
> >
> >
> > Sw2#
> >
> > Monitor session 1 source vlan 999
> >
> > Monitor session 1 destination int fa0/10
> >
> >
> > Rgds,
> >
> > Vijay
> >
> >
> >
> > On 9/17/07, Akaradeth N@MS@DCTH-BKK
> <Akaradeth.N@datacraft-asia.com>
> > wrote:
> > >
> > > Hi Guys,
> > >
> > >
> > >
> > > I have question about remote span, which
> configuration is a correct one,
> > > (1) or (2)
> > >
> > >
> > >
> > > SW1 vlan 100, remote span vlan 999
> > >
> > > SW2 vlan 100, remote span vlan 999, IPS on port
> fa0/10
> > >
> > >
> > >
> > > (1)
> > >
> > > Sw1#
> > >
> > > Monitor session 1 source vlan 100 rx
> > >
> > > Monitor session 1 destination remote vlan 999
> reflect fa0/19
> > >
> > >
> > >
> > > Sw2#
> > >
> > > Monitor session 1 source vlan 100 , 999 rx
> > >
> > > Monitor session 1 destination int fa0/10
> > >
> > >
> > >
> > > or
> > >
> > >
> > >
> > > (2)
> > >
> > > Sw1#
> > >
> > > Monitor session 1 source vlan 100 rx
> > >
> > > Monitor session 1 destination remote vlan 999
> reflect fa0/19
> > >
> > >
> > >
> > > Sw2#
> > >
> > > Monitor session 1 source vlan 100
> > >
> > > Monitor session 1 destination int fa0/10
> > >
> > >
> > >
> > > Monitor session 2 source remote vlan 999
> > >
> > > Monitor session 2 destination int fa0/10
> > >
> > >
> > >
> > >
> > >
> > > Thank in advance
> > >
> > >
> > >
> > > Regards,
> > >
> > > Akaradeth
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
****************************************************************************
> > > This email and all contents are subject to the
> following disclaimer:
> > >
> > > http://www.datacraft-asia.com/disclaimer
> > >
> > >
> >
>
****************************************************************************
> > >
> > >
>
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART