From: Alexander Belov (abelov@technoserv.ru)
Date: Mon Sep 17 2007 - 08:29:18 ART
Can You draw ? :)
From the bottom story I got You Have 2 (two) distribution layer Switches...
i.e. 2 x 3560...
Or You are saying You have two 3560s acting as one switch (like a cluster)?
:)
WBR,
Alex
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Donghai Zhang
Sent: Monday, September 17, 2007 3:01 PM
To: Marc La Porte
Cc: ccielab@groupstudy.com
Subject: Re: where to set the default gateway?
Maybe I was not telling this clearly. I mean I need one of the 3560s to be
the gateway of the PCs in the local LAN. No that there are two 3560s, which
one would be proper?
2007/9/17, Marc La Porte <marc.a.laporte@gmail.com>:
>
> You only have to put a default-gateway on a layer 2 switch, so if both
> 3560s are layer 3 then it's not necessary on there
>
> On 9/17/07, Donghai Zhang <zdh1207@gmail.com> wrote:
> >
> > Actually the distribute switches will be L3 at this moment. And the
> > 3560s would be the default gateways of the hosts.The problem is which
> > 3560 to set ?
> >
> > 2007/9/17, Marc La Porte <marc.a.laporte@gmail.com>:
> > >
> > > Assuming that the core switch will be L3 and the distribution switches
> > > L2, I would put the SVI on the core switch and the default gateway on
the
> > > distribution switches
> > >
> > > On 9/17/07, Donghai Zhang <zdh1207@gmail.com > wrote:
> > > >
> > > > Dear all,
> > > > I have got a problem recently. Suppose I have two catalyst 3560, as
> > > > distribute switch, one catalyst 4506,as core switch. I need to set
> > > > default-gateways of those hosts inside local LAN in the
3560s.Theploblem is
> > > > that: in which 3560 should I set the SVI interface? If I set in one,
> > > > then
> > > > the hosts within the same vlan but connecting to the other switch
> > > > have to
> > > > travel to this switch so that they can be servced routing,thus
> > > > bandwith
> > > > would be waste.
> > > > Anyone help me ,thanks advance.
> > > >
> > > >
> > > >
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART