From: Donghai Zhang (zdh1207@gmail.com)
Date: Mon Sep 17 2007 - 08:28:22 ART
Yes,they are in the same VLAN when there are hosts need to be in a same
vlan. the questions is if one host connecting to one 3560 need to access
hosts in other vlans, it possibly has to trave to the other 3560 so to get
routed.
It is quite well to set the default gateway on the core switch but I just
want to set it on the distribute switch and make sure if it works.
2007/9/17, Marc La Porte <marc.a.laporte@gmail.com>:
>
> Are both 3560s in the same VLAN?
> Why not set the default gateway of the host to the SVI on the core switch?
>
>
> On 9/17/07, Donghai Zhang <zdh1207@gmail.com> wrote:
> >
> > Maybe I was not telling this clearly. I mean I need one of the 3560s to
> > be the gateway of the PCs in the local LAN. No that there are two 3560s,
> > which one would be proper?
> >
> > 2007/9/17, Marc La Porte <marc.a.laporte@gmail.com>:
> > >
> > > You only have to put a default-gateway on a layer 2 switch, so if both
> > > 3560s are layer 3 then it's not necessary on there
> > >
> > > On 9/17/07, Donghai Zhang <zdh1207@gmail.com > wrote:
> > > >
> > > > Actually the distribute switches will be L3 at this moment. And the
> > > > 3560s would be the default gateways of the hosts.The problem is
> > > > which 3560 to set ?
> > > >
> > > > 2007/9/17, Marc La Porte <marc.a.laporte@gmail.com>:
> > > > >
> > > > > Assuming that the core switch will be L3 and the distribution
> > > > > switches L2, I would put the SVI on the core switch and the default gateway
> > > > > on the distribution switches
> > > > >
> > > > > On 9/17/07, Donghai Zhang <zdh1207@gmail.com > wrote:
> > > > > >
> > > > > > Dear all,
> > > > > > I have got a problem recently. Suppose I have two catalyst 3560,
> > > > > > as
> > > > > > distribute switch, one catalyst 4506,as core switch. I need to
> > > > > > set
> > > > > > default-gateways of those hosts inside local LAN in the
> > > > > > 3560s.The ploblem is
> > > > > > that: in which 3560 should I set the SVI interface? If I set in
> > > > > > one, then
> > > > > > the hosts within the same vlan but connecting to the other
> > > > > > switch have to
> > > > > > travel to this switch so that they can be servced routing,thus
> > > > > > bandwith
> > > > > > would be waste.
> > > > > > Anyone help me ,thanks advance.
> > > > > >
> > > > > >
> > > > > > _______________________________________________________________________
> > > > > > Subscription information may be found at:
> > > > > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART