From: robert.steeneken@getronics.com
Date: Sat Sep 15 2007 - 04:01:28 ART
140.40.2.2 is the loopback of R2. When I divide the LAN in two different vlans it works when I make a mroute for 140.40.2.2 to the ip address of R6
But shouldn,t the RPF change when I add a mroute?
*, 224.2.2.2), 00:13:55/00:02:56, RP 140.40.2.2, flags: SCL
Incoming interface: FastEthernet0.56, RPF nbr 140.40.56.5 <--
Outgoing interface list:
Loopback0, Forward/Sparse, 00:13:55/00:02:56
R7(config)#ip mroute 140.40.2.2 255.255.255.255 140.40.56.6
(*, 224.2.2.2), 00:00:02/00:02:57, RP 140.40.2.2, flags: SCL
Incoming interface: FastEthernet0.56, RPF nbr 140.40.56.5, Mroute <--
Outgoing interface list:
Loopback0, Forward/Sparse, 00:00:02/00:02:57
R1
|
R2 (RP)
|
R4
/ \
/ \
R5 R6
__|______|__
|
R7
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART