From: Ashok CCIE (ashok.ccie@gmail.com)
Date: Wed Sep 12 2007 - 09:55:26 ART
Thanks Everyone....
-Ashok
On 9/13/07, Engin <engin@sekom.com.tr> wrote:
>
> Hi Ashok,
>
> When you use loopback interfaces also as source interface you need to
> define
> it by using
>
> neighbor x.x.x.x update-source loopback x under the bgp AS.
>
> Because by default bgp packets are sourced of outgoing interface to the
> neighbor.
>
> Thanks...
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Ashok
> CCIE
> Sent: Wednesday, September 12, 2007 2:27 PM
> To: ccielab@groupstudy.com
> Subject: BGP over Frame-relay
>
>
> Hi Team,
>
> I am configuring IBGP b/w loopback interfaces of two interfaces which are
> over Frame-relay. But my routers are not making any neighbor relationship.
> Why so?
>
> Config is here..
>
> R1
>
> router bgp 100
> no synchronization
> bgp router-id 2.2.2.1
> bgp log-neighbor-changes
> network 1.1.1.0 mask 255.255.255.0
> network 2.2.2.1 mask 255.255.255.255
> neighbor 2.2.2.2 remote-as 100
> neighbor 2.2.2.2 next-hop-self
> neighbor 2.2.2.3 remote-as 100
> neighbor 2.2.2.3 next-hop-self
> no auto-summary
>
> R2
>
> router bgp 100
> no synchronization
> bgp router-id 2.2.2.2
> bgp log-neighbor-changes
> network 1.1.1.0 mask 255.255.255.0
> network 2.2.2.2 mask 255.255.255.255
> neighbor 2.2.2.1 remote-as 100
> neighbor 2.2.2.1 ebgp-multihop 255
> no auto-summary
>
>
> Could you please help?
>
> Thanks,
> Ashok
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:11 ART