From: Engin (engin@sekom.com.tr)
Date: Wed Sep 12 2007 - 21:52:42 ART
Hi Ashok,
When you use loopback interfaces also as source interface you need to define
it by using
neighbor x.x.x.x update-source loopback x under the bgp AS.
Because by default bgp packets are sourced of outgoing interface to the
neighbor.
Thanks...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Ashok
CCIE
Sent: Wednesday, September 12, 2007 2:27 PM
To: ccielab@groupstudy.com
Subject: BGP over Frame-relay
Hi Team,
I am configuring IBGP b/w loopback interfaces of two interfaces which are
over Frame-relay. But my routers are not making any neighbor relationship.
Why so?
Config is here..
R1
router bgp 100
no synchronization
bgp router-id 2.2.2.1
bgp log-neighbor-changes
network 1.1.1.0 mask 255.255.255.0
network 2.2.2.1 mask 255.255.255.255
neighbor 2.2.2.2 remote-as 100
neighbor 2.2.2.2 next-hop-self
neighbor 2.2.2.3 remote-as 100
neighbor 2.2.2.3 next-hop-self
no auto-summary
R2
router bgp 100
no synchronization
bgp router-id 2.2.2.2
bgp log-neighbor-changes
network 1.1.1.0 mask 255.255.255.0
network 2.2.2.2 mask 255.255.255.255
neighbor 2.2.2.1 remote-as 100
neighbor 2.2.2.1 ebgp-multihop 255
no auto-summary
Could you please help?
Thanks,
Ashok
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:11 ART