From: Adham Ali (adhamccie@yahoo.com)
Date: Wed Sep 12 2007 - 08:49:29 ART
Hello,
You don't need the "ebgp-multihop 255" as it is IBGP
u need to use "neighbor 2.2.2.x update-source loopback <number> " at both sides
Thank you,
Adham!
Ashok CCIE <ashok.ccie@gmail.com> wrote:
Hi Team,
I am configuring IBGP b/w loopback interfaces of two interfaces which are
over Frame-relay. But my routers are not making any neighbor relationship.
Why so?
Config is here..
R1
router bgp 100
no synchronization
bgp router-id 2.2.2.1
bgp log-neighbor-changes
network 1.1.1.0 mask 255.255.255.0
network 2.2.2.1 mask 255.255.255.255
neighbor 2.2.2.2 remote-as 100
neighbor 2.2.2.2 next-hop-self
neighbor 2.2.2.3 remote-as 100
neighbor 2.2.2.3 next-hop-self
no auto-summary
R2
router bgp 100
no synchronization
bgp router-id 2.2.2.2
bgp log-neighbor-changes
network 1.1.1.0 mask 255.255.255.0
network 2.2.2.2 mask 255.255.255.255
neighbor 2.2.2.1 remote-as 100
neighbor 2.2.2.1 ebgp-multihop 255
no auto-summary
Could you please help?
Thanks,
Ashok
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:11 ART