From: Prasanna.2.C (pc0029360@TechMahindra.com)
Date: Wed Sep 12 2007 - 08:50:40 ART
Hi Ashok,
Please add the update source Loopback command in order to get neighborship.
Thanx and BRgds
Prasanna C| Network Designer | BTGS - CISCO| Tech Mahindra
The difficult we do immediately, the impossible just takes a little longer
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ashok CCIE
Sent: Wednesday, September 12, 2007 4:57 PM
To: ccielab@groupstudy.com
Subject: BGP over Frame-relay
Hi Team,
I am configuring IBGP b/w loopback interfaces of two interfaces which are
over Frame-relay. But my routers are not making any neighbor relationship.
Why so?
Config is here..
R1
router bgp 100
no synchronization
bgp router-id 2.2.2.1
bgp log-neighbor-changes
network 1.1.1.0 mask 255.255.255.0
network 2.2.2.1 mask 255.255.255.255
neighbor 2.2.2.2 remote-as 100
neighbor 2.2.2.2 next-hop-self
neighbor 2.2.2.3 remote-as 100
neighbor 2.2.2.3 next-hop-self
no auto-summary
R2
router bgp 100
no synchronization
bgp router-id 2.2.2.2
bgp log-neighbor-changes
network 1.1.1.0 mask 255.255.255.0
network 2.2.2.2 mask 255.255.255.255
neighbor 2.2.2.1 remote-as 100
neighbor 2.2.2.1 ebgp-multihop 255
no auto-summary
Could you please help?
Thanks,
Ashok
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:11 ART