From: David Prall (dcp@dcptech.com)
Date: Mon Sep 10 2007 - 22:39:04 ART
Scott,
This was a config off of an 877. I'm not sure about Firmware revisions for
the ADSL HWIC's. I would recommend opening a TAC Case and getting
verification on the firmware version that is required.
David
-- http://dcp.dcptech.com> -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On > Behalf Of Scott M Vermillion > Sent: Monday, September 10, 2007 9:14 PM > To: 'Cisco certification'; 'Cisco certification' > Subject: RE: Anybody Have A Working ADSL Config for UK (BT)?? > > Hi David, > > First, thanks for the very quick reply! Given the hour over > in the UK, I > didn't expect reply anytime soon (I know, you're in the US). > The below is > pretty much exactly what we have (I didn't have the LOM nor > the "bt" in the > pvc statement. Code is C3845-ADVIPSERVICESK9-M, Version > 12.4(9)T3. The way > this program works is that equipment is bought long before ever being > shipped. I try to preach to the guys to bring code up to date > when they get > on the ground but there are so many competing priorities that > they rarely > do. > > What I notice in the log is that the virtual access interface > keeps getting > unbound from the dialer. We'll get a tftp server set up on > site tomorrow and > bring firmware up to date. > > Thanks a million as always David! > > Cheers, > > Scott > > -----Original Message----- > From: David Prall [mailto:dcp@dcptech.com] > Sent: Monday, September 10, 2007 6:55 PM > To: 'Scott M Vermillion'; 'Cisco certification'; 'Cisco certification' > Subject: RE: Anybody Have A Working ADSL Config for UK (BT)?? > > Make sure you have the latest firmware loaded > http://www.cisco.com/pcgi-bin/tablebuild.pl/800 > > The firmware is most likely the cause of the flapping. > > For config something like this should work: > > interface ATM0 > no ip address > no ip redirects > no ip proxy-arp > no atm ilmi-keepalive > pvc bt 0/38 > encapsulation aal5mux ppp dialer > dialer pool-member 1 > ! > dsl operating-mode auto > dsl lom 200 > ! > ! > interface Dialer1 > ip address negotiated previous > no ip redirects > no ip proxy-arp > encapsulation ppp > dialer pool 1 > dialer-group 1 > priority-group 1 > no cdp enable > ppp authentication chap callin > ppp chap hostname <userid> > ppp chap password <password> > ! > ip route 0.0.0.0 0.0.0.0 Dialer1 > ! > > David > > -- > http://dcp.dcptech.com > > > > -----Original Message----- > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On > > Behalf Of Scott M Vermillion > > Sent: Monday, September 10, 2007 8:33 PM > > To: 'Cisco certification'; 'Cisco certification' > > Subject: OT: Anybody Have A Working ADSL Config for UK (BT)?? > > > > Hi all, > > > > > > I've got a new ADSL connection I'm trying to bring up > > remotely in the UK (I > > have a guy on the ground there but he's not too up on this > > stuff). It's > > constantly flapping up and down. I've looked at quite a > > number of example > > configs for the UK and all looks good. I know we've got a > > good number of > > list members in the UK and I think I've even seen some posts > > related to > > ADSL. > > > > > > > > Thanks much, > > > > > > > > Scott > > > > ______________________________________________________________ > > _________ > > Subscription information may be found at: > > http://www.groupstudy.com/list/CCIELab.html > > ______________________________________________________________ > _________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:10 ART