From: Albert Ip (ipwaikuen@gmail.com)
Date: Mon Sep 10 2007 - 05:56:16 ART
Two sites, site 1 is using callmanger while site 2 is using cme with cue,
all connection is through WAN link. I have made a xcode at site 2 cme, so
that site 1 can leave voicemail for site 2 phones.
However, I cannot leave vm, but the the is already forward to cue and there
is no sound from cue aa. The CUE pilot is 8888, I try to dial 8888 from site
1, it shows connected but no sound play.
Anyone help?
Config as follow....
Site 2 CME
voice service voip
allow-connections h323 to sip
allow-connections sip to h323
supplementary-service h450.12
h323
!
voice translation-rule 1
rule 1 /^22338888/ /8888/
!
voice translation-profile VM
translate called 1
!
sccp local FastEthernet0/0.100
sccp
sccp ccm 10.10.1.1 priority 1
sccp mtp sessions 4
!
dspfarm transcoder maximum sessions 4
dspfarm confbridge maximum sessions 1
dspfarm codec g729 vad disable
dspfarm
!
dial-peer voice 10 voip
translation-profile outgoing VM
destination-pattern 8888
session protocol sipv2
session target ipv4:10.10.1.2
incoming called-number 899[89]....
dtmf-relay sip-notify
codec g711ulaw
no vad
!
dial-peer voice 41 voip
translation-profile outgoing VM
destination-pattern 22338888
session protocol sipv2
session target ipv4:10.10.1.2
incoming called-number 899[89]....
dtmf-relay sip-notify
codec g711ulaw
no vad
!
telephony-service
sdspfarm units 1
sdspfarm transcode sessions 4
sdspfarm tag 1 mtp000f9049f730
voicemail 8888
call-forward pattern .T
transfer-system full-consult
transfer-pattern .T
transfer-pattern 4...
secondary-dialtone 9
!
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:10 ART