From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Sep 07 2007 - 15:19:17 ART
Which answer would you trust more the DocCD or the actual IOS?
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
>----- Original Message -----
Subject: Re: IOS image name and boot sequence
Date: Fri, September 7, 2007 6:57
From: "ISolveSystems" <support@isolvesystems.com>
> Is it practical to go through the procedure to get into ROMMON in the real
> lab? Can I find the info from the DocCD?
>
> Thanks.
>
> On 9/6/07, Brian Dennis <bdennis@internetworkexpert.com> wrote:
> >
> > Get into ROMMON and do a confreg. You will be able to see the name of
the
> > file the router will try to boot.
> >
> > Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> > bdennis@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987
> > Direct: 775-745-6404 (Outside the US and Canada)
> >
> >
> > >----- Original Message -----
> > Subject: IOS image name and boot sequence
> > Date: Thu, September 6, 2007 20:46
> > From: "ISolveSystems" <support@isolvesystems.com>
> >
> > > R3 and R4 are connected via ethernet. Question says that R3 failed to
> > > recognized its flash memory. This caused R3 to try and boot a default
> > IOS
> > > image via TFTP. Without configuring R3, allow R3 to boot a default IOS
> > > image from R4 in case that it cannot locate its own.
> > >
> > > How do I show the default boot sequence and filename?
> > >
> > > Thanks.
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:10 ART